TRAXXAS

This is the Velineon VXL3m Extreme Brushless Power System from Traxxas. This is for the 1/16th scale VXL from Traxxas FEATURES: Ultra high temp sintered neodymium motor magnets Balanced rotor High...

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One Left Axle Carrier One Right Axle...

This is a set of original replacement caster blocks for the TRAXXAS TRX-3 2wd electric offroad racing buggy and the SRT stadium truck. FEATURES: Made of white nylon For 25° caster INCLUDES: One...

These are the Replacement Front Suspension Arms for many Traxxas kits. These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction Black in...

This is the Torque Control Slipper Upgrade Kit for the Traxxas T-Maxx. FEATURES: Metal and plastic construction INCLUDES: One torque control slipper upgrade kit without Optidrive Installation...

These are the Rod Ends for the 1/16 scale Traxxas Revo and Slash series. FEATURES: Black nylon construction INCLUDES: Eight Nylon Rod Ends Eight Nylon flanged Balls REQUIRES: Threading onto...

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo and T-Maxx. FEATURES: Repairs damaged slipper clutches INCLUDES: (1) Spring (2) Nuts (1) Pin (1) Metal Plate (3) Pads (2) Washers...

This is a Replacement Flywheel Nut from Traxxas. FEATURES: Metal construction. Used on the Traxxas TRX 2.5. engine INCLUDES: (1) Flywheel Nu

This is the Replacement Roller Clutch for the T-Maxx 2.5. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the starter FEATURES: Steel construction INCLUDES:...

This is the Front Bumper and Mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck. FEATURES: Nylon construction Black in color INCLUDES: One Front Bumper and bumper mount REQUIRES:...

This is the Rear Bumper and Mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck. FEATURES: Nylon construction Black in color INCLUDES: One Rear Bumper and bumper mount REQUIRES:...

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter. FEATURES: 1S shrink wrapped cell INCLUDES: 3.7V 650mAh 1S LiPo battery SPECS: Length: 2.08" (53mm) Width: 1.18" (30mm) Thickness: 0...

This is the Front and Rear Skidplate for the Traxxas Slash. This skidplate bolts to the Chassis and the Bulkheads TRAC5530 and provides protection to the front differential. FEATURES: Skidplate is...

These are the Talon Tires Pre-Mounted on Gemini Black Chrome Wheels. for the 1/16 scale Traxxas Revo. FEATURES: Nylon wheels Gemini 5-spoke design Black chrome in color INCLUDES: Two Pre-assembled...

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES: Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail...

This is the Traxxas 7-Cell 8.4V 3000mAh Power Cell NiMH Hump Pack with iD Connector. FEATURES: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows...

This is the 8.4V NiMH 4200mAh Power Cell Series 5 7-cell Hump Battery Pack from Traxxas. FEATURES: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows...

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front...

These are Steering Bellcranks and Draglinks for the Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank One Link One Arm REQUIRES: Rustler or Stampede

This is the Middle Drive Belt for the Nitro 4-TEC from Traxxas. FEATURES: Direct fit replacement part INCLUDES: One middle drive belt SPECS: Length: 121 spline Width: 4.5mm COMMENTS: This belt...

This is a Front Drive Belt for the Traxxas 4-Tec 3.3 FEATURES: Rubber construction 78 tooth INCLUDES: One front drive belt SPECS: Width: .17" (4.5mm)

These are Replacement Clutch Shoes for the Traxxas T-Maxx. These mount to the flywheel and engage the clutch. FEATURES: Carbon Construction Black in Color INCLUDES: Two Clutch Shoes One...

This is the electric powered, 2.4GHz radio controlled, ready to run 1/16 scale Traxxas Slash Short-Course Racing Truck. FEATURES: Chassis: Nylon composite construction 0.08" (2mm) thick bathtub type...

These are the SCT Off-Road Tires and Wheels for use on the Traxxas 1/16 Slash VXL 4WD RTR FEATURES: Assembled and glued SCT satin chrome wheels Chrome beadlock style Foam inserts INCLUDES: Two SCT...

These are the Assembled SCT Tires and Wheels for use on the Traxxas 1/16 Slash VXL 4WD RTR FEATURES: SCT satin chrome wheels Red beadlock style SCT off-road racing tires INCLUDES: One Left and One...

This is the Steering Arm for use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction Black in color INCLUDES: Upper and Lower Steering Arm Steering Link Servo Horn Servo...

This is the Blue Aluminum Steering Bellcrank from Traxxas. FEATURES: Metal construction, anodized blue in color Factory assembled and ready to install INCLUDES: One blue-anodized T6 aluminum...

This is the Front Bulkhead for the Traxxas Slash 4x4. FEATURES: Composite plastic construction, black in color Fastens to front of chassis and holds diff housings in place INCLUDES: Front Bulkhead...

These are the Satin Chrome, Dual Profile Front Wheels with Monster Jam Replica Tires. FEATURES: Black plastic wheels with satin chrome finish outer rim All terrain rubber tires INCLUDES: Two Front...

These are the Satin Chrome, Dual Profile Rear Wheels with Monster Jam Replica Tires. FEATURES: Black plastic wheels with satin chrome finish outer rim All terrain rubber tires INCLUDES: Two Rear...