TRAXXAS

Half shafts, center front (Revo 3.3) (internal splined (1)/ external splined (1)/ center rear (internal splined (1)/ external splined (1)) (plastic parts only)

Half shafts, center front (Revo 3.3) (internal splined (1)/ external splined (1)/ center rear (internal splined (1)/ external splined (1)) (plastic parts only)

Turnbuckles, camber links, 58mm (assembled with rod ends and hollow balls) (2)

Type a description for this product here...

Suspension arms, front (left & right), Exo-Carbon finish (Jato)

Steering blocks, Rustler/Stampede/Bandit/slash/nitro slash (2), 6061-T6 aluminum (red-anodized)/ 5x11mm ball bearings (4)

Nuts, aluminum, flanged, serrated (4mm) (green-anodized) (4)

Nuts, aluminum, flanged, serrated (4mm) (pink-anodized) (4)

Silicone diaphragms (4pk)

Transmitter, TQi Traxxas Link enabled, 2.4GHz high output, 2-channel (transmitter only)

This is the 1/10 Electric Powered, 2.4GHz Radio Controlled, Ready-to-Run Traxxas Bandit XL-5 Off-Road Buggy. ...

Rebuild kit (for Revo/Maxx steel constant-velocity driveshafts) (includes pins, dustboots, & lube for 2 driveshafts assemblies)

Traxxas Revo Front/Rear Driveshaft Assembly (1) (TRA5451X) 

Toe links, Maxx (Tubes red-anodized, 7075-T6 aluminum, stronger than titanium) (112mm, front) (2)/ rod ends (4)/ aluminum wrench (1) (For Maxx models w/sealed pivot ball suspension & 3.8'' wheels)

Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 65-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 62-tooth (0.8 metric pitch, compatible with 32-pitch)

Spur gear, 58-tooth (0.8 metric pitch, compatible with 32-pitch)

Body clip (mounting clip), angled, 90-degrees (10)

Glow plug, super-duty (long-medium)/gasket

Ultra Shocks (grey) (xx-long) (complete w/ spring pre-load spacers & springs) (rear) (2)

Ultra Shocks (grey) (long) (complete w/ spring pre-load spacers & springs) (2

Traxxas machined-aluminum bulkheads increase the strength of the T-Maxx. They provide a super-strong foundation for the suspension and chassis and maximum protection against crash damage...

This is the optional Aluminum Turnbuckle set for the Traxxas Jato. FEATURES: Anodized aluminum construction,...

This is the Optional Big Bore Shock Set for the Traxxas T-Maxx and E-Maxx Trucks. These replace the plastic shocks that come stock with the kit. ...

This is a set of Steel Driveshafts for the Traxxas 3.3 Revo/T-Maxx. FEATURES:- Steel construction ...

These are the optional 17mm Splined Wheel Hubs for the New T-Maxx 3.3 4WD Nitro Monster Truck RTR ...

These are the optional 17mm Splined Wheel Hubs for the New T-Maxx 3.3 4WD Nitro Monster Truck RTR ...

These are the optional 17mm Splined Wheel Hubs for the New T-Maxx 3.3 4WD Nitro Monster Truck RTR ...

These are the Front or Rear Driveshaft Assemblies for the LaTrax Teton Monster Truck from Traxxas. ...