Hot Bodies

This is the V2 Low Center Gravity version of the 1.0mm 1/8 Rear Lexan Wing from Ultimate Racing. This rear wing provides less rotation than the V1 version in slow corners while improving stability in fast corners due to its reduced weight and lower...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

These are 16mm diameter Soft Shock Bladders compatible with the majority of car brands such as Mugen, Kyosho, Xray, Serpent, HB, Losi, Mayako among others. They have the same design as the red membrane (UR1702). The material with which they are made and...

The MegaFoil The MegaFoil comes standard with easily identifiable dimples that you ream out for mounting on HB/TLR/Mugen/AE/Tekno/Sworkz/Mayako/Kyosho/WRC Vehicles

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 6 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

This is the 1/8 off road Plastic Rear Wing from Ultimate Racing. It’s intended for both, buggy and truggy. This rear wing provides more rotation in slow corners while improving stability in fast corners. It’s common for racers to add holes...

This is the 1/8 off road Plastic Rear Wing from Ultimate Racing. It’s intended for both, buggy and truggy. This rear wing provides more rotation in slow corners while improving stability in fast corners. It’s common for racers to add holes...

This is the 1/8 off road Plastic Rear Wing from Ultimate Racing. It’s intended for both, buggy and truggy. This rear wing provides more rotation in slow corners while improving stability in fast corners. It’s common for racers to add holes...

The entire design has been completely revised from the previous 2020 version to ensure longer life, less maintenance and greater reliability.Differences from the previous Version:- The new shoes has 35% more contact surface area, which ensures...

LFR Beretta body (clear) for HB D819RS nitro and electric. This body also fits the Tekno NB48 2.1 and EB48 2.1. To use this body on the EB48 2.1 you will need to use the wide body kit #LFRN2037. For fitment on the NB48 2.1 remove...

When the World Championship arrives, it’s nice to be prepared with new items to fine tune the racing package at the largest event in the world. JConcepts arrived with a fresh lid for the HB Racing D8 vehicle used in competition by ace driver David...

This is the Closed End Wheel Nut from Ultimate Racing. It is machined from T67075 aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others. Its closed end design helps protect the wheel hex from...

This is the Ultimate Racing Lightweight +2mm Wheel Hexagon Set. They are machined from T6-7075 Aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others. Thanks to its design, its weight has been...

This is the Ultimate Racing Lightweight +1mm Wheel Hexagon Set. They are machined from T6-7075 Aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others. Thanks to its design, its weight has been...

This is the Ultimate Racing Lightweight 0mm Wheel Hexagon Set. They are machined from T6-7075 Aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others. Thanks to its design, its weight has been...

This is the Ultimate Racing Lightweight 0mm, +1mm and +2mm Wheel Hexagon Set. They are machined from T6-7075 Aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others. Thanks to its design, its weight...

HB Racing Woven Graphite Rear Arm Covers (D8 Evo)

HB Racing Hub Arm Set Type 5 (D8T/E8T Evo3)

HB Racing Steering Arm Type 4 (D8T/E8T Evo3)

HB Racing Rear Hub (D8T/E8T Evo3)

HB Racing Steering Block Set LW (6 degree)  

HB Racing D8 Caster Block Set LW (22.5 Degree)  

The new "Limited Version" Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to unscrew/screw without problems the...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to unscrew/screw without problems the Allen Screw even...