Slash 4x4

Tire & wheel assy, glued (SCT satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front) Pair of Kumho off-road tires come pre-glued and mounted with foam inserts to satin-chrome SCT wheels with black beadlock-style...

Tire & wheel assy, glued (SCT Split-Spoke satin chrome, black beadlock style wheels, Kumho tires, foam inserts) (2) (2WD front) Pair of Kumho off-road tires come pre-glued and mounted with foam inserts to satin-chrome Split-Spoke wheels with...

Driveshaft, center, 6061-T6 aluminum (orange-anodized) (214mm)   Traxxas designed this one-piece driveshaft out of tough 6061-T6 aluminum to be both strong and lightweight. Internal splines fit directly onto the input shafts of the front and...

  Shocks, GTR xx-long orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represent the peak of suspension technology. The hard-anodized PTFE-coated aluminum shock bodies have 13...

  Shocks, GTR xx-long pink-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) 1/10 scale XX-long GTR shocks represent the peak of suspension technology. The hard-anodized PTFE-coated aluminum shock bodies have 13...

1/10 scale long GTR shocks represent the peak of suspension technology. The brilliantly-anodized aluminum shock bodies are coated with PTFE for the slickest damping action available. Their 13 mm bores hold over 70% more oil than the standard Ultra Shocks...

TRA7461-ORNG GTR Shocks long with TiN shafts for Rustler 4X4 & Slash 4X4 (2) Shocks, GTR long Orange-anodized, PTFE-coated bodies with TiN shafts (fully assembled, without springs) (2) Replacement part for these models: Slash 4X4...

Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware Traxxas aluminum stub axle carriers add the strength of 6061-T6 alloy with a...

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for 2 driveshafts) The driveshaft U-joint rebuild kit...

Slipper clutch, complete (for Slash 4x4) This slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard replacement for existing clutches, or as an upgrade for...

  This clipless heavy-duty clear Slash® 4X4 body is made from thicker polycarbonate than standard bodies for increased durability. From mild to wild, Traxxas clear bodies are your own personal canvas. You choose the color and design...

Ring gear, differential/ pinion gear, differential (machined, spiral cut) (front) Spiral-cut 37-tooth ring and 13-tooth pinion front differential gear sets are CNC-machined from a solid block of steel. The teeth are cut with a slight curve to minimize...

Battery/Charger completer pack (includes #2970 iD® charger (1), #2844R 5200mAh 7.4V 2-cell 35C LiPo ID® Battery (1)) The 2s LiPo hard case completer pack includes a 2844R 2-cell 5200 mAh 7.4 volt LiPo battery and...

Body, Slash® 2WD (also fits Slash® VXL & Slash® 4X4), pink & purple (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash® with an all-new look? This...

Body, Slash® VXL 2WD (also fits Slash® 4X4), Fox® Edition (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash® with an all-new look? These clipless...

JConcepts Hi-Flow SCT body is the 2011 ROAR National Champion. One of the most critical aspects of tuning a Short Course truck is the performance of the body. JConcepts, always on top of Short Course body development, starting with the original Truth,...

Body conversion kit, Slash 2WD (includes front & rear body mounts, latches, hardware) (for clipless mounting) The Slash® 2WD clipless body conversion kit allows you to convert your 1/10 scale 2WD Slash chassis and body to the...

Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD) (clear, requires painting)/ window masks/ decal sheet (requires #6967 latches and #6966 latch mounts for clipless mounting) From mild to wild, Traxxas clear bodies are your own...

 Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), Blue and Green (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash® with an all-new look?...

 Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange and Blue (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash® with an all-new look?...

  Body, Slash® 4X4 (also fits Slash® VXL & Slash® 2WD), orange (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash® with an all-new look? This...

Latch, body mounts (front & rear) Front and rear Slash clipless body mounts secure to 6966 clipless latch mounts and retainers (sold separately) for a firm hold on the body. Clipless body mounts require require 6940 body mounts...

Body mount, front/ adapter, front/ inserts (2) (for clipless body mounting) The front clipless body mount adapter with inserts (2) secures to the front shock tower to provide a firm base for clipless bodies.

Body mount, rear/ inserts (2) (for clipless body mounting) The rear clipless body mount adapter with inserts (2) secures to the front shock tower to provide a firm base for clipless bodies.