E-Revo 2.0

  Few speed controls can match the VXL-6s™ ESC for raw, tire-shredding power. Whether tearing through the desert in the Unlimited Desert Racer® or maxing out the Sledge® on a 70+ mph speed run, the VXL-6s ESC pours on...

Motor, 2000Kv 77mm, brushless (with 6.5mm gold-plated connectors & high-efficiency heatsink) The massive Velineon® 2000 Kv brushless motor lays down the torque and horsepower for blistering acceleration and screaming top speed.

Traxxas EZ-PEAK 40W USB-C CHARGER Includes 1- Charger, EZ-Peak®, USB-C, 40W, NiMH/LiPo with iD® Auto Battery Identification

Traxxas Rc Car/Truck Stand X-Trucks Blue This aluminum car stand is larger than the original version and is great for the bigger vehicles in your collection. The top rotates for ease of use and working on your vehicle.

  E-Revo® VXL Stainless Hardware Kit       Give your 1/10 scale E-Revo VXL a complete upgrade with this stainless steel hardware kit. The hardware kit replaces the standard hardware on your vehicle with stainless steel...

E-Revo® Hardware Kit     Give your 1/10 scale E-Revo VXL a complete refresh with this replacement hardware kit. Traxxas hardware kits replace the screws and fasteners on your vehicle with new factory-fresh hardware...

This is the Traxxas 2S, 7.4V, 5800mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide...

Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers (4)   Replacement part for these models: E-Revo® VXL Brushless    

Wheelie Bar arm (1)/ connector (1)/ 3x12 SS (hex drive) (4) Replacement adjustable arm for Traxxas #3678 and #5472 wheelie bars. Includes 3x12 mm shoulder screws (4).  

Caster spacers (4)/ shims (4) Set of four caster spacers and shims

Tires & wheels, assembled, glued (3.8" black chrome wheels, black chrome wheel covers, Sledgehammer® tires, foam inserts) (2) Ultra-rugged Sledgehammer® tires provides extreme traction and control for a variety of off-road terrain. The...

Wheel nuts, splined, 17mm, serrated (Green-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with...

Wheel nuts, splined, 17mm, serrated (Black-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with...

Wheel nuts, splined, 17mm, serrated (red-anodized) (4) Set of four 17 mm wheel nuts are serrated for extra bite on the wheel to keep them snug no matter how intense the action gets. The beautiful anodized finish combines eye-catching looks with...

Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads) Skid plate set includes front and rear skid plates with 3x10 mm screws (6) and 3x30 mm screw. Fits 8629 and 8630 bulkheads...

Spur gear, 50-tooth, steel (wide-face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) has extra-wide steel teeth for maximum power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing...

In The Box (1) 2021 Ford Bronco Clear Body (1) High-Quality Decal Sheet (1) Window Mask Sheet Paint-then-Peel Overspray Film Built-In Overview This is a 2021 Ford® Bronco Clear Body. Calling all...

Push rods, aluminum (Red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish. Accessory part for these...

Push rods, aluminum (Green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish. Accessory part for...

Push rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and anodized with a brilliant finish. Accessory part for these...

Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two short steering servo horns. Includes two 3x20 mm steering links with pre-installed rod ends and hollow balls...

Chassis brace, rear (fits E-Revo®/Summit) Reinforce your chassis with this blue-anodized aluminum rear chassis brace. Accessory part for these models: E-Revo® VXL Brushless E-Revo® VXL Brushless: TQi™ Traxxas Link™...

Shocks, GTR hard-anodized, PTFE-coated aluminum bodies with TiN shafts (fully assembled w/o springs) (4) PTFE-coated aluminum GTR shocks provide the ultimate in damping performance and control. A machined, threaded aluminum body with spring collar...

Shocks, GTR aluminum, red-anodized (fully assembled w/o springs) (4) Red-anodized aluminum GTR shocks provide the ultimate in damping performance and control. A machined, threaded aluminum body with spring collar allows easy and precise preload...