TRAXXAS

Body, Maxx Slash® (clear, requires painting)/ window masks/ decal sheet (includes body support, body plastics, latches, & hardware for clipless mounting) From mild to wild, Traxxas clear...

Slash Late Model Unassembled Body Kit Hit the oval track in style with the Traxxas Slash® Late Model unassembled body kit. The Late Model body kit incorporates Traxxas’ unique...

2WD VXL Bearing Kit     Restore your Traxxas model to peak performance with this bearing kit. The bearing kit swaps out the standard bearings with new factory-fresh replacements...

Skid plates, front & rear (green) Green front and rear skid plates for Traxxas 2WD Stampede models. Accessory part for these models: BIGFOOT® No. 1 Officially Licensed...

Brake disc (semi-metallic material) Replacement semi-metallic brake disc           Replacement part for these...

Pipe coupler, molded (black)/ exhaust deflecter (rubber, black)/ cable ties, long (2)/ cable ties, short (2) Black molded rubber pipe coupler and deflector with 2 long and 2 short cable...

Pipe coupler, molded (blue)/ Exhaust deflecter (rubber, blue)/ cable ties, long (2)/ cable ties, short (2) Blue molded rubber pipe coupler and deflector with 2 long and 2 short cable...

Box, receiver (sealed)/ foam pads/ 2.5x12mm CS (2)/ 3x6mm CS (2)/ 3x12mm BCS (2) Sealed receiver box for vehicles equipped with the low-CG 4X4 chassis. Includes foam pad, silicone seal, grease, 2...

Velineon® VXL-6s Brushless Power System, waterproof (includes VXL-6s ESC and 2000Kv, 77mm motor) The Velineon® VXL-6s is custom-tuned specifically for the 2000 Kv motor...

  Velineon 380 Brushless Motor     The Velineon® 380 Brushless Motor uses ultra high-temperature Neodymium magnets, high-speed ball bearings, and a precision...

This is the Traxxas USB-C Charger for 2S LIPO ID Battery

Carriers, stub axle (orange-anodized 6061-T6 aluminum) (rear) (left & right)/ 3x32mm hinge pins (2)/ e-clips (6)/ hardware Traxxas aluminum stub axle...

Engineered For Drivers Jato® 4X4 VXL rewrites the book on buggy performance with 60+ mph* speed and laser-focused precision. An ultra-low-CG chassis with...

U-joints, driveshaft (carrier (4)/ 4.5mm cross pin (4)/ 3mm headed pin (4)/ 4x15mm screw pin (2)/ hex pin (2)/ e-clips (10)/ 3x6x0.5 MW (8)) (metal parts for...

  Transmission, complete (fits 1/10-scale 2WD Rustler®, Bandit®, Stampede®, Slash®) The Pro-Built Magnum 272™ transmission...

  Skid plates, front & rear (black) Black front and rear skid plates for Traxxas 2WD Stampede models. Replacement part for these...

Slipper clutch, complete (for Slash 4x4) This slipper clutch comes completely assembled and ready to install into your 1/10 scale 4X4 vehicle. The slipper clutch can be used as a standard...

Spring, shock (1.057 rate) (2) Short-length Ultra Shock springs are offered in different rates to tune your suspension performance or compensate for lighter or heavier vehicle configurations...

Spring, shock (blue) (2) These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension performance...

Spring, shock (green) (2) These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension performance...

Spring, shock (red) (3.7 rate) (2) These springs are made from high-quality spring steel with a durable powder-coated finish. Different spring rates allow you tune your 4-Tec's suspension...

Driveshaft, center rear, 6061-T6 aluminum (black-anodized) (fully assembled)/ 3mm screw pin (2) The rear center driveshaft is made from lightweight and extra-tough 6061-T6 aluminum and then...

Wheel hubs, hex, steel (4) Steel hex wheel hubs fit with greater precision and deliver slip-proof performance with their splined-hex design. Sold as a set of four.   Accessory part for...

Spring, shock, white (GTR xx-long) (0.762 rate green) (1 pair) Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

Spring, shock, white (GTR xx-long) (0.711 rate orange) (1 pair) Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

Spring, shock, white (GTR xx-long) (1.004 rate blue) (1 pair) Shock springs for 1/10 scale XX-long GTR shocks use high-quality spring steel with a durable white powder-coated finish. GTR springs...

Sway bar kit, Maxx Slash® (front and rear) (includes front and rear sway bars and linkage) Sway bars are a powerful tool to change up the handling of your Maxx® Slash®. Sway bars...

Caster blocks (c-hubs), extreme heavy duty, Black (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Replacement left and right caster blocks...

Caster blocks (c-hubs), extreme heavy duty, Red (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Replacement left and right caster blocks...

Caster blocks (c-hubs), extreme heavy duty, Green (left & right)/ 3x26mm hinge pins (2)/ 3x15mm BCS (2) (for use with #9180 and 9181 upgrade kit) Replacement left and right caster blocks...