NB48 2.0

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

This is an optional Tekno RC Aluminum 17mm Lightened Hex Wheel Hub Set with a +4mm offset, and is intended for use with the Tekno RC EB48 1/8 Buggy. The Tekno RC offset wheel hubs for the EB48 will not only increase the stability, but will also help to...

After 8 months of intensive testing, we are finally ready to reveal our revolutionary MR105-ZZS bearings, specifically designed and developed for the Clutch Bell.This is not just a commercial product, but a true innovation created to deliver...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Product DescriptionTKR9290 – Sway Bar Dead Band Bushing Set (2.4, 2.7, 3.0, 3.3mm, all 2.x vehicles) Vehicle CompatibilityTKR9290 - Sway Bar Dead Band Bushing Set (2.4, 2.7, 3.0, 3.3mm, all 2.x vehicles) is included with the EB48 2.2, ET48 2.2,...

TKR9047H – Spindle Arms (EB/NB/ET/NT48, req TKR9041X/9141/B, Type H) Vehicle CompatibilityTKR9047H - Spindle Arms (EB/NB/ET/NT48, req TKR9041X/9141/B, Type H) is not included with any kit.This can be used with the EB48 2.1, EB48 2.2, ET48 2.2,...

TKR9047F – Spindle Arms (EB/NB/ET/NT48, req TKR9041X/9141/B, Type F) Vehicle CompatibilityTKR9047F - Spindle Arms (EB/NB/ET/NT48, req TKR9041X/9141/B, Type F) is included with the EB48 2.2, ET48 2.2, NB48 2.2 and NT48 2.2 kits and can be used as a...

TKR9047E – Spindle Arms (EB/NB/ET/NT48, req TKR9041X/9141/B, Type E) Vehicle CompatibilityTKR9047E - Spindle Arms (EB/NB/ET/NT48, req TKR9041X/9141/B, Type E) is not included with any kit.This can be used with the EB48 2.1, EB48 2.2, ET48 2.2,...

TKR9149B – Differential Cross Pins (2.x, for 2-gear diff, 3pcs) Vehicle CompatibilityTKR9149B - Differential Cross Pins (2.x, for 2-gear diff, 3pcs) is not included with any kit.This can be used with the EB48 2.1, EB48 2.2, ET48 2.2, NB48 2.1,...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...