RC8T3.2

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

Team Associated RC8T4 and RC8B4 Factory Team (3.5x44.5mm) Rear Chrome Shock Shafts. These optional shock shafts are intended for the RC8T4 and RC8B4 platforms to provide smoother and friction-free damping action. Package includes two chrome rear shock...

Team Associated RC8T3.2 Factory Team HD Front Upper Suspension Arms. These optional HD (Heavy Duty) suspension arms are a great upgrade to your RC8T3.2/RC8T3.2e truggy! The HD polymer material provides a stiffer platform for the suspension to...

This is a replacement set of Team Associated RC8T3.2 Rear Suspension Arms, intended for use with RC8 T3.2e Team 1/8 4WD Off-Road Electric Truggy Kit.     Compatibility Team Associated RC8T3.2 Team Associated RC8T3...

Team Associated RC8T3.2 Factory Team HD Rear Suspension Arms. These optional HD (Heavy Duty) suspension arms are a great upgrade to your RC8T3.2/RC8T3.2e truggy! The HD polymer material provides a stiffer platform for the suspension to work and...

Team Associated RC8T3.2 Factory Team HD Front Lower Suspension Arms. These optional HD (Heavy Duty) suspension arms are a great upgrade to your RC8T3.2/RC8T3.2e truggy! The HD polymer material provides a stiffer platform for the suspension to work...

Team Associated RC8T4 Body Posts and Bumper. This is a replacement intended for the RC8T4 and RC8T4e vehicles. Package includes one bumper, and four body posts.   

This is a pack of two replacement Team Associated 131mm RC8T3 Universal Driveshafts for use in the front and rear of the vehicle.   

These are the 5x80mm Turnbuckles for the Team Associated RC8T3 and RC8T3e Truggy Kits. jxs 05/04/16 ir/jxs  

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

RC10B6.3 Chassis, +3mm     This part fits the following vehicles RC10B6.3 RC10B6.3D

    FT 16mm Shock Piston, 5x1.3mm, tapered   New tapered FT 16mm shock pistons for RC8B3 and RC8T3 series 16mm shocks are available now! Machined from high quality Delrin(R), they add more tuning options to dial in suspension settings...

    FT 16mm Shock Piston, 5x1.3mm, flat   New flat FT 16mm shock pistons for RC8B3 and RC8T3 series 16mm shocks are available now! Machined from high quality Delrin(R), they add more tuning options to dial in suspension settings...

After 8 months of intensive testing, we are finally ready to reveal our revolutionary MR105-ZZS bearings, specifically designed and developed for the Clutch Bell.This is not just a commercial product, but a true innovation created to deliver...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...