ECX

Beach RC says... This is a ECX Barrage Aluminum Steering Spindle Set. 

Beach RC says... This is a pack of two replacement ECX Molded Driveshafts, for use with the 1/18 Temper Mini Rock Crawler. 

The Hot Racing ECX 48P Super Duty Steel Spur Gear is a heavy duty steel 48P 85T spur gear for 1/10th scale Horizon ECX 2WD vehicles, including the Boost Buggy, Circuit Stadium Truck, Ruckus Monster Truck, and Torment SCT. Features:  Steel...

 This is the replacement ECX V3 Waterproof ESC/Receiver unit used in the AMP Desert Buggy and AMP Monster Truck. Package includes factory installed battery, motor and receiver connectors. Note: A separate speed control and separate...

Hot Racing optional upgrade heavy duty splined star drive axle kit for 1/10th scale ECX 2WD electric vehicles, including the Amp, Circuit Stadium Truck, Ruckus Monster Truck, and Torment SCT. These axles will NOT work with the Boost Buggy...

This is a pair of Trencher 2.2 M2 (Medium) All Terrain Tires,Foam Inserts and Desperado Wheels from Pro-Line. FEATURES: Fits the front or rear of the 1/16 scale Traxxas RevoHorizontal H-shaped tread for high degree of tractionTall tread height for...

Speedpack 3300mAh Ni-MH 7-Cell Flat with EC3 Conn Dynamite Battery 1-Year Limited Warranty – ALL of our Dynamite Nickel and Lithium-chemistry rechargeable batteries are covered. See terms and conditions. (US and Canada Only)

This is a pack of two replacement ECX Circuit Wheels for use in the front or rear of the vehicle. These wheels are for use with the 2WD Circuit.   

This is a replacement 1/18 ECX Complete Driveshaft Set. Package includes two pre-assembled slider type driveshafts.   

This is a pair of optional Hot-Racing CV Drive Shafts with Hubs for 1/10 scale 2WD Electric ECX Trucks.**Will NOT work with the Boost Buggy.** FEATURES: Fits the ECX Circuit Stadium Truck, Ruckus Monster Truck and Torment SCTCNC machined #45...

This is a replacement Dynamite 4-Cell NiMh Battery for the ECX 1/24 Scale 4WD Temper Rock Crawler. 

Dynamite Tazer 380 Motor. This is the 25 Turn motor included with the ECX Roost 1/18 and includes factory installed motor wires with bullet connectors helping to make installation easier. 

Replacement ECX Chassis Set. This chassis is for all ECX 1/18 4wd vehicles.

This package includes a replacement set of front and rear arms for all 1/18 ECX vehicles.

This is a replacement Electrix RC Slipper Set, and is intended for use with the Electrix RC Circuit 1/10 2wd stadium truck. This set includes the Slipper Plates, Pads and Spring

This is a replacement 1/18 ECX Wheel Hex Set. Package includes four wheel hexes, and four axle pins.

Electrix RC Camber/Toe Link Set, and is intended for use with the Electrix RC Circuit 1/10 stadium truck.

This is the replacement battery for the ECX Ruckus and Torment 1/24 scale trucks. 

This is a replacement ECX M3 Binder Head Screw Set, including 45 screws.   Included:  (5) Phillips Screw, RH, M3x8mm  (5) Phillips Screw, RH, M3x10mm  (5) Phillips Screw, RH, M3x12mm  (5) Phillips Screw, RH,...

This is a 35 piece replacement ECX M3 Button Head Self-Tapping Phillips Screw Kit, for use with the 4WD Circuit, Ruckus and Torment trucks.  Included:  (5) M3x8mm Phillips Screw  (5) M3x10mm Phillips Screw  (5) M3x12mm Phillips...

ECX M3 Flat Head Self-Tapping Screw Set, including twenty-five screws.   Included:  (5) Phillips Screw, FH-ST, M3x8mm  (5) Phillips Screw, FH-ST, M3x10mm  (5) Phillips Screw, FH-ST, M3x12mm  (5) Phillips Screw, FH-ST,...

This is a replacement ECX M2.5 Screw Set.   Included:  (5) Phillips Screw, CH, M2x8mm  (5) Phillips Screw, RH, M2.5x4mm (5) Phillips Screw, RH, M2.5x8mm  (5) Phillips Screw, RH, M2.5x10mm  (5) Phillips Screw, FH-ST,...

ECX 4WD Main Driveshaft for the Torment and Ruckus 4WD Trucks. 

ECX Mod 1 Pinion Gear Set. This set includes a 9 tooth and 12 tooth pinion gear, with set screws. For all 4wd ECX Vehicles