B6.3D

RC10B6 FT Front Suspension Arms, gull wing, carbon   Lightweight - Approximately 12% weight savings over "hard" material. Extreme Rigidity - More predictable handling in high traction applications and increased vehicle stability in fast...

SMJ MACHINE CUT BRASS SERRATE FLANGED WHEEL NUT M4 (4pcs) High-precision serrated flange wheel nuts machined from brass material. Higher traction can be obtained by replacing the standard aluminum wheel nuts on 1/10 scale touring cars with these brass...

The chassis plate on most 1:10 Team Associated race vehicles (RC10B6.3, RC10T6.2, RC10SC6.2) is manufactured with a 27.5 degrees kickup angle at the nose. These bulkheads allow for adjustment between 25 degrees and 30 degrees of kickup depending on the...

Use 2 each of the graphite spacers under the carbon steering plate to raise it higher. It's to reduce the bump steer. The included screws will be needed to complete the install. Package includes one steel bulkhead, four spacers with hardware.

Brace prevents bending and twisting under impactExtends the life of the wing mount assemblyBlue anodized aluminum, fasteners included(Also fits older models with updated #91718 molded parts)

Beach RC says...  Stealthy 2 color anodized 7075 alloy rear ball stud mount for the B6.3-B6.1 T6.1 and SC6.1 series. Customized polished black base with blue chamfered accents goes great with your stock plastic parts or after market blue...

Beach RC says...  Heavy duty, 7075 alloy constructed 10gr front bulkhead for the B6.3-B6.1, T6.1, SC6.1 and all '6' series Associated 2wd buggies and trucks.. Bulkhead has 2 settings for kick up- 25° and 30°, depending on which...

Beach RC says...  For all B6, T6 and SC6 series. Heavy duty 7075 alloy front bulkhead with our popular 2 color anodizing treatment. Intricately machined to reduce its weight to only 15 grams (only 4 more than stock) while insuring its heavy duty...

Beach RC says... The Exotek B6.3/T6.1/SC6.1 Aluminum Steering Cranks are a stealthy 2 color anodized 7075 motor steering bell crank option for the B6.3-B6.1 T6.1 SC6.1. The machined aluminum construction is more durable than the stock parts. Plus,...

Perfect start for custom dirt oval and no prep drag racing builds!The Team Associated RC10B6 Builder’s Support Kit is a great way to acquire major sub-assemblies with custom builds in mind. The applications are endless for this kit, if it is a...

The Assault RC "Revolver" Series 3/32" Tungsten Carbide Diff Balls come 14 to a pack and are a direct replacement to any vehicle utilizing this size balls.  When prepared and installed correctly you will not have a smoother feeling diff than you...

The Carbon Fiber Gladiator Series one-piece wing buttons are the bling accessory that every owner of the Team Associated B6 series 1/10 buggies needs.  This unit is not only the most stylish wing button on the market, but it is super affective and...

Beach RC says.... This is the Team Associated RC10B6.3 Decal Sheet

Beach RC says.... This is the Team Associated RC10B6.3 Chassis.

Beach RC says.... This is the Team Associated RC10B6.3 Side Rails.

Beach RC says.... This is the Team Associated RC10B6.3 Front Top Plate and Ballstud Mount.

Beach RC says.... This is the Team Associated Brass version of the wide-pivot RC10B6.3 Arm Mount CUsed to tune weight bias, moves weight further back in the carWeight=23g vs. 4g for the stock aluminum version

Beach RC says.... This is the Team Associated RC10B6.3 Arm Mount D, wide, aluminum

Beach RC says.... This is the Team Associated RC10B6.3 HD Slipper Spring and Adapters.

Beach RC says.... This is the Team Associated RC10B6.3 Servo Mount Brace, Tower Covers, Wire Clips, Rod Ends  

Beach RC says.... This is the Team Associated RC10B6.3 FT Battery Strap Shoulder Screws, blue aluminum

Beach RC says.... This is the Team Associated RC10B6.3 Arm Mount C, wide, aluminum  

Beach RC says.... This is the Team Associated RC10B6.3 FT Servo Mount Set.

Beach RC says.... Direct replacement for the molded plastic B6.3 kit braceSpace included for mounting a transponder using double-sided tape2.5mm carbon fiber material used for that Factory Team look