8ight-X

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 7 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

After 8 months of intensive testing, we are finally ready to reveal our revolutionary MR105-ZZS bearings, specifically designed and developed for the Clutch Bell.This is not just a commercial product, but a true innovation created to deliver...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

Universal Driveshaft (2): 8X, 8XE 2.0        

Complete Kit 3-Shoe Clutch with 0.95 springs. Ready to assemble and install on your nitro engine.

Wing development is serious business and JConcepts has responded with a technically advanced alternative for 1/8th racing. The Razor polycarbonate wing features a brand-new design mimicking the injection molded Razor as closely as possible. Incorporating...