Bodies

ELDORA SPRINT BODY KIT – New sprint body kit with updated hood and nose for better fit. Works with Outlaw 4, Enforcer 7 and all cars that use the new V2 Cage. New #9131 Eldora Nose and #9132 Eldora Hood also available separately.

Custom Works Flat 6"x6" Top  Wing w/Mounts

The SALVAS MUDboss NEXTGEN innerpanel! This innerpanel will include a template to ‘drill’ actual doors for retrofitment Bodies will still be sold in actual configuration (6 parts) Racers will be allowed to use this new part to replace...

.020 Edm Lexan Body made for our 10th scale dirt oval cars. includes: hood, nose and front bumper plate

CDK RC Bodies Shark Sprint Nose with out the mount.  This will fit the Custom Works RC Wide cages

CDK RC Bodies High Roller Sprint Hood / Nose with out the mount.  This will fit the Custom Works RC Wide cages

These optional polycarbonate pieces attach to the front of the rear arms to help keep dirt from hitting the CVA and rear shock shaft. These were designed for the Outlaw series of cars but will work on just about any CW adjustable arm provided that the...

  Our HurriKane for 2020, although VERY close to the original is all new and becomes our 1/10 scale foam tire chassis LM body- Our most realistic overall look yet!- Re-shaped nose is a little curvier and has a taller left side flopper- Just...

The Assault RC Flexi Brace body braces will keep your body shape while allowing the panels to flex when you are under pressure.  These braces have a black or slate grey carbon fiber look on one side and black or slate grey look on the other side...

MR Kustoms Iceman LM kitClear body kit with outer film- .040” clear body, cage, roof, nose- .060” clear nose option*Nose/hood section is trimmed along rear matching edges during manufacturing process

High Down Force Flat Wing: The unique design of the wings molded center section provides a combination of High Downforce and Balance. Team drivers have noticed an increase in overall downforce using this wing along with a more consistent feel when...

Our new 8 sq in front wing center is molded from 0.030” polycarbonate with a rolled leading edge and molded in rear spoiler. Side board are from .020” polycarbonate flat stock with a 0.25“ bend on the top and bottom edge, and the wing...

The CDK front wing mount (CDKM087) has been updated to provide trackside adjustment front to back along with wing angle. Now with the adjustment of 2 screws you can adjust the front pitch/height of your front wing to a 1/2” of adjustment...

Beach RC says...This is a Custom Works SPRINT WING CENTER SECTION ONLY 6×6

Beach RC says...This is a Custom Works Wing & Side Panel Brace. This is a replacement for the Enforcer 7 and Outlaw 3 kits. Package includes one clear wing and side panel brace.