RC8T3

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 7 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Team Associated RC8T4 Body Posts and Bumper. This is a replacement intended for the RC8T4 and RC8T4e vehicles. Package includes one bumper, and four body posts.   

This is a pack of two replacement Team Associated 131mm RC8T3 Universal Driveshafts for use in the front and rear of the vehicle.   

These are the 5x80mm Turnbuckles for the Team Associated RC8T3 and RC8T3e Truggy Kits. jxs 05/04/16 ir/jxs  

RC10B6.3 Chassis, +3mm     This part fits the following vehicles RC10B6.3 RC10B6.3D

    FT 16mm Shock Piston, 5x1.3mm, tapered   New tapered FT 16mm shock pistons for RC8B3 and RC8T3 series 16mm shocks are available now! Machined from high quality Delrin(R), they add more tuning options to dial in suspension settings...

    FT 16mm Shock Piston, 5x1.3mm, flat   New flat FT 16mm shock pistons for RC8B3 and RC8T3 series 16mm shocks are available now! Machined from high quality Delrin(R), they add more tuning options to dial in suspension settings...

After 8 months of intensive testing, we are finally ready to reveal our revolutionary MR105-ZZS bearings, specifically designed and developed for the Clutch Bell.This is not just a commercial product, but a true innovation created to deliver...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed end, ideal for protecting the axle or hub from dust and...