Black Edition

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 7 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Wing development is serious business and JConcepts has responded with a technically advanced alternative for 1/8th racing. The Razor polycarbonate wing features a brand-new design mimicking the injection molded Razor as closely as possible. Incorporating...

This is a set of 6 optional 70mm Front Shock Spring Set from Ultimate Racing. It’s intended for the majority 1/8 off road cars with 16mm shocks like Mugen, Kyosho, Losi, Sworkz, Xray, Mayako, etc. These shock springs allow you to...

This is a set of 6 optional 86mm Rear Shock Spring Set from Ultimate Racing. It’s intended for the majority 1/8 off road cars with 16mm shocks like Mugen, Kyosho, Losi, Sworkz, Xray, Mayako, etc. These shock springs allow you to...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 6 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

This is the V2 Low Center Gravity version of the 1.0mm 1/8 Rear Lexan Wing from Ultimate Racing. This rear wing provides less rotation than the V1 version in slow corners while improving stability in fast corners due to its reduced weight and lower...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

These are 16mm diameter Soft Shock Bladders compatible with the majority of car brands such as Mugen, Kyosho, Xray, Serpent, HB, Losi, Mayako among others. They have the same design as the red membrane (UR1702). The material with which they are made and...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 6 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

This is the 1/8 off road Plastic Rear Wing from Ultimate Racing. It’s intended for both, buggy and truggy. This rear wing provides more rotation in slow corners while improving stability in fast corners. It’s common for racers to add holes...

This is the 1/8 off road Plastic Rear Wing from Ultimate Racing. It’s intended for both, buggy and truggy. This rear wing provides more rotation in slow corners while improving stability in fast corners. It’s common for racers to add holes...

This is the 1/8 off road Plastic Rear Wing from Ultimate Racing. It’s intended for both, buggy and truggy. This rear wing provides more rotation in slow corners while improving stability in fast corners. It’s common for racers to add holes...

This is the Closed End Wheel Nut from Ultimate Racing. It is machined from T67075 aluminum and anodized in dark gray. Intended for Mugen, Associated, Xray, Sworkz, Losi and Tekno among others. Its closed end design helps protect the wheel hex from...