1RC

Includes (1) V/W-type, rh, engine and header assembly (1) V/W-type, lh, engine and header assembly   Important Note: This is a 3D printed part, it is not molded.  This part can become more brittle over time and maybe become more prone...

1/18 Vintage Midget, Airbox Hood, DIY Kit, Clear   Please take note: This is a "Do It Yourself" style kit and requires modifications to some parts in order to complete the assembly. This is a conversion kit only and does require a complete...

1/18 Vintage Midget, Flat Hood, DIY Kit, Clear   Please take note: This is a "Do It Yourself" style kit and requires modifications to some parts in order to complete the assembly. This is a conversion kit only and does require a complete 1RC...

1/18 Sprint Car, Red, Ready-to-Run.   NOTE- On this clear car, the top and front wing come un-assembled and not attached to the car so you can paint the parts before you install them.   Package includes the following: 1.  1/18 Sprint...

Includes: (1) 230mAh Nickel Metal Hydride 5-Cell Battery with JST connector   IMPORTANT NOTE: An aftermarket charger is needed to charge this battery.  The stock charger that comes in the box with the 18th Midget WILL...

Includes: (2) Solid kingpins (1) 2mm drill bit   Note:  This upgrade requires modifications to spindles and front axle.  Please read instructions in link below to ensure you are OK making these modifications before you purchase...

Includes: (1) 1.5mm L-wrench (1) 4mm metal nut wrench for wheel removal

Includes: (10) Steel Nylock Nuts, M2 x 0.4mm x 4mm

Includes: (4) Fully assembled shocks (4) 1mm spring clips for spring preload (4) 2mm spring clips for spring preload

Includes: (1) Engine header set - Black

Includes: (1) Engine header set - chrome

Includes (2) Front wheel covers - sprint car (2) Rear wheel covers - sprint car (Car components shown in images not included) Important Note: This is a 3D printed part, it is not molded.  This part can become more brittle over time and...

Includes (10) Shock shaft friction o-ring

Includes: (10) Steel Ball Studs, 2.5mm x 3mm (10) Steel Ball Studs, 2.5mm x 4mm (2) Steel Pivot Balls, 3.0mm x 2.2mm x 1.5mm Hole

Includes: (1) Right side cage (1) Left side cage (1) Visor crossbar (1) Rear top crossbar (1) Rear crossbar (1) Front crossbar skid plate (1) Upper side cross bar (1) Hood crossbar (1) Right front shock mount (1) Left front shock mount (1)...

Includes (1) Motor heat sink   Note - This part will work on the midget car.

Includes (1) 8700Kv brushless motor with pressed on 10 tooth pinion gear (0.4M)

These bearings replace the stock rear axle bushings and provide more support to the rear axle and improve gear mesh. Includes: (2) 3mm x 6mm x 2.5mm flanged steel ball bearings

Includes (4) 2mm x 5mm x 2mm steel ball bearings (2) 3mm x 6mm x 2.5mm steel ball bearings (2) 3mm x 6mm x 2.5mm flanged steel ball bearing (1) Bearing shim - this shim is used on left rear of sprint car when flanged bearings is used with sprint...

Includes (4) 2mm x 5mm x 2mm steel ball bearings (4) 3mm x 6mm x 2.5mm steel ball bearings

Includes: (2) Pre-mounted front tires with Hoosier logo on chrome wheels (2) Pre-mounted rear tires with Hoosier logo on chrome wheels

Includes: (2) Pre-mounted front tires with Hoosier logo on black wheels (2) Pre-mounted rear tires with Hoosier logo on black wheels

Includes: (1) Top wing center section (1) Top wing left side board (1) Top wing right side board (1) Top wing mount (2) Top wing nut plate (1) Front wing center section (1) Front wing left side board (1) Front wing right side board (1) Front...

Includes: (1) Hood, standard, clear (1) Tail tank, clear (1) Driver figure, clear (1) RH side panel (1) LH side panel (1) Nut plate (1) Headrest (1) Helmet Hardware not inluded Note - hood, tail tank, driver figure and side panels are clear,...