MBX8 Eco

These are the 36Mood +5mm Higher Rear Carbon Shock Tower for the MBX8.

These are the 0 and 2 Inserts for the 36Mood Rear Hubs To better understand how they work check this video of Robert Batlle

36MOOD aluminum Rear Hubs are an upgrade for your Mugen MBX7, MBX7R or MBX8 kits. With these hubs you have an extra setup option on your rear roll center, having a higher hole position and you can change your rear toe in with the three different longlife...

Beach RC says... These are the replacement front shock shafts, there are 2 in a package (piston washer not include): X8/E, X8T/E  

Beach RC says... This bag contains 4 replacement emulsion damper cap seals. 

The ProTek RC Mugen MBX8 Series Carbon Fiber Side Guards are feather light, molded carbon fiber options that offer reduced weight, with no change in handling characteristics. The design provides increased ground clearance, giving you that extra edge...

Beach RC says...  These are the stock Mugen 15x21x4mm ball bearings. There are 2 in a bag.  

Beach RC says...  This is a rear 3.0mm steel sway bar for: X8/7/6 series buggys and truggys

Beach RC says...  This is a rear 2.9mm steel sway bar for: X8/7/6 series buggys and truggys

Beach RC says...  This is the rear wing mount which is 15mm higher than the stock on. This will create more traction and better jumping abilities on various racing conditions. This will fit the X8 series of buggy's and truggy's Items included: -...

Beach RC says...  This is an optional Mugen Seiki Non-Trailing Front Hub Carrier Set, for use with the MBX8/E. They do come stock on the MBX8T/E. They can also be used on the MBX7 line of vehicles, but you must also use E2153. The E2146 inline...

Beach RC says... Plastic Spur Gear H.T. 46T: X8E