8ight T 4.0

This is the V2 version 1/8 off road Plastic Rear Wing from Ultimate Racing. It is intended for both, buggy and truggy. The differences from its predecessor are subtle changes in shape, allowing the rear end to “follow” the corner more...

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

Colorful branded closed end wheel nuts by Ultimate Racing. Choose your color to match your ride with 7 colors of performance wheel nuts for your 1/8 scale rides.   Colors: Blue, Orange, Green, Black, Purple, Pink, Red   Included: - 4 wheel nuts

This is the V2 version 1/8 off road Plastic Rear Wing from Ultimate Racing. It is intended for both, buggy and truggy. The differences from its predecessor are subtle changes in shape, allowing the rear end to “follow” the corner more...

This is the V2 version 1/8 off road Plastic Rear Wing from Ultimate Racing. It is intended for both, buggy and truggy. The differences from its predecessor are subtle changes in shape, allowing the rear end to “follow” the corner more...

The new "Limited Edition", crafted like the previous model from Grade 5 Titanium (6Al4V), stands out with a completely redesigned look and an even lighter structure. Enhancing its new aesthetic is an exclusive blue PVD coating, which not only elevates...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 7 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...