Tekno

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 7 different colors. The muffler support will allow you to have 2 different configurations, fixed or mobile:-...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of violent impacts avoiding unpleasant deformations...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

This is an optional Tekno RC Aluminum 17mm Lightened Hex Wheel Hub Set with a +4mm offset, and is intended for use with the Tekno RC EB48 1/8 Buggy. The Tekno RC offset wheel hubs for the EB48 will not only increase the stability, but will also help to...

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

  Introducing the MIP Bypass1 Hi-Flow Tapered Pistons, the perfect upgrade for your 1/8th scale RC car shocks. These Tapered pistons are designed with multiple hole options and a 13mm diameter, providing a high flow rate for better damping and...

After 8 months of intensive testing, we are finally ready to reveal our revolutionary MR105-ZZS bearings, specifically designed and developed for the Clutch Bell.This is not just a commercial product, but a true innovation created to deliver...

Elevate your racing performance with the JConcepts RM2 1/8 L.D. Razor Buggy Wing, designed for low drag, maximum stability, navigating tight corners and conquering big air jumps, this wing provides the edge you need to race faster, jump smoother, and...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit comes in a convenient box containing 20 pieces of each...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly process.   Fits the following brands that use our V2...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where they worked the results in terms of performances were...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly, and to limit as much as possible the rebound gain that...

Tekno RC is proud to announce the release of the NT48 2.2, the latest evolution of our highly successful 1/8th scale competition nitro truggy. After over two years of rigorous testing and development on tracks across the United States and Europe, the...

Vehicle CompatibilityTKR6033D - Shock Spring Set (1.5 x 9.75T, 3.71lb/in, 73mm, orange) is not included with any kit.This can be used with the EB48 2.1, EB48 2.2, NB48 2.1 and NB48 2.2 vehicles and should be a direct replacement for the stock part or...

TKR6033C – Shock Spring Set (1.5 x 9.75T, 3.71lb/in, 78mm, orange) Vehicle CompatibilityTKR6033C - Shock Spring Set (1.5 x 9.75T, 3.71lb/in, 78mm, orange) is not included with any kit.This can be used with the EB410.2, EB48 2.0, EB48 2.1, EB48 2...

TKR6032D – Shock Spring Set (1.5 x 10.0T, 3.59lb/in, 73mm, yellow) Vehicle CompatibilityTKR6032D - Shock Spring Set (1.5 x 10.0T, 3.59lb/in, 73mm, yellow) is not included with any kit.This can be used with the EB48 2.1, EB48 2.2, NB48 2.1 and NB48...

TKR6032C – Shock Spring Set (1.5 x 10.0T, 3.59lb/in, 78mm, yellow) Vehicle CompatibilityTKR6032C - Shock Spring Set (1.5 x 10.0T, 3.59lb/in, 78mm, yellow) is not included with any kit.This can be used with the EB48 2.1, EB48 2.2, NB48 2.1 and NB48...