TRAXXAS

This is a Left and Right Gearbox half with Idler Shaft for the Traxxas Stampede and Traxxas Rustler. FEATURES: Gray plastic construction Steel idler shaft INCLUDES: One gearbox One idler shaft...

This is the optional Steel Idler Gear for many Traxxas Vehicles. FEATURES: Steel construction INCLUDES: One steel 30T idler gear REQUIRES: Installation on vehicle

1/10 Scale Brushless High-Performance Monster Truck with Traxxas Stability Management! The Stampede 4X4 VXL is engineered like no other to turn extreme power into extreme monster truck fun! Traxxas...

This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3...

This is the Replacement Forward and Reverse Clutch Bell for the Traxxas T-Maxx 4WD Radio Control Monster Truck. This gear set is installed on the primary gear shaft in the transmission. FEATURES:...

This is the Velineon VXL3m Extreme Brushless Power System from Traxxas. This is for the 1/16th scale VXL from Traxxas FEATURES: Ultra high temp sintered neodymium motor magnets Balanced rotor High...

These are the Left and Right Axle Carriers for use on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction Black in color INCLUDES: One Left Axle Carrier One Right Axle...

This is a set of original replacement caster blocks for the TRAXXAS TRX-3 2wd electric offroad racing buggy and the SRT stadium truck. FEATURES: Made of white nylon For 25° caster INCLUDES: One...

These are the Replacement Front Suspension Arms for many Traxxas kits. These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction Black in...

This is the 1/10 scale Electric Powered 2.4GHz TQi Radio Controlled Ready to Run Traxxas E-Maxx Monster Truck. FEATURES: Chassis: 0.08 (2mm) thick composite with quick release hold downs and...

The Traxxas Slash VXL puts you in the driver’s seat for intense fender-to-fender, high-flying off-road action. Since its introduction, the Slash has set the standard for durability,...

This is the Torque Control Slipper Upgrade Kit for the Traxxas T-Maxx. FEATURES: Metal and plastic construction INCLUDES: One torque control slipper upgrade kit without Optidrive Installation...

These are the Rod Ends for the 1/16 scale Traxxas Revo and Slash series. FEATURES: Black nylon construction INCLUDES: Eight Nylon Rod Ends Eight Nylon flanged Balls REQUIRES: Threading onto...

This is a Slipper Clutch Rebuild Kit for the Traxxas Revo and T-Maxx. FEATURES: Repairs damaged slipper clutches INCLUDES: (1) Spring (2) Nuts (1) Pin (1) Metal Plate (3) Pads (2) Washers...

This is a Replacement Flywheel Nut from Traxxas. FEATURES: Metal construction. Used on the Traxxas TRX 2.5. engine INCLUDES: (1) Flywheel Nu

This is the Replacement Roller Clutch for the T-Maxx 2.5. This is located at the EZ Start end of the crankshaft. This is the One Way bearing for the starter FEATURES: Steel construction INCLUDES:...

This is the Front Bumper and Mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck. FEATURES: Nylon construction Black in color INCLUDES: One Front Bumper and bumper mount REQUIRES:...

This is the Rear Bumper and Mount for the Traxxas Slash 1/10 2WD Short Course Racing Truck. FEATURES: Nylon construction Black in color INCLUDES: One Rear Bumper and bumper mount REQUIRES:...

Overview Key Features 4-amp DC Peak Detecting Fast Charger TQ™ 2.4GHz radio system Waterproof electronics for all-weather driving excitement in water, mud and snow! 35+mph* Top...

This is the 650mAh LiPo Battery for the Latrax Alias Quadcopter. FEATURES: 1S shrink wrapped cell INCLUDES: 3.7V 650mAh 1S LiPo battery SPECS: Length: 2.08" (53mm) Width: 1.18" (30mm) Thickness: 0...

This is the Front and Rear Skidplate for the Traxxas Slash. This skidplate bolts to the Chassis and the Bulkheads TRAC5530 and provides protection to the front differential. FEATURES: Skidplate is...

These are the Talon Tires Pre-Mounted on Gemini Black Chrome Wheels. for the 1/16 scale Traxxas Revo. FEATURES: Nylon wheels Gemini 5-spoke design Black chrome in color INCLUDES: Two Pre-assembled...

This is the Traxxas iD LiPo Battery Adapter. FEATURES: Connects Traxxas iD LiPo batteries to LiPo chargers with separate balance ports INCLUDES: iD LiPo Battery Adapter with 3S Balance Port Adapter...

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES: Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail...

This is the Traxxas 7-Cell 8.4V 3000mAh Power Cell NiMH Hump Pack with iD Connector. FEATURES: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows...

This is the 8.4V NiMH 4200mAh Power Cell Series 5 7-cell Hump Battery Pack from Traxxas. FEATURES: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows...

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles. The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front...

These are Steering Bellcranks and Draglinks for the Traxxas Rustler and Stampede. FEATURES: White Plastic Construction INCLUDES: One Bellcrank One Link One Arm REQUIRES: Rustler or Stampede

This is the Brake Disc for the Traxxas Nitro Jato Stadium Truck. FEATURES: Composite construction Grey in color INCLUDES: One Composite Brake Disc REQUIRES: Assembly onto Vehicle

This is the Stock Replacement Rear Body Mount Set for the Traxxas Street Sport. These are located on the rear gearbox. FEATURES: Black nylon construction INCLUDES: One rear body mount base Two...