TRAXXAS

This is the replacement Bulkhead Tie Bars for the Traxxas Slash 4X4. FEATURES: Aluminum construction Anodized blue in color INCLUDES: Two bulkhead tie bars (front and rear) REQUIRES: Installation...

This is the Bulkhead Rear For the Traxxas 1/10 Rally VXL rally car or Slash with LCG Chassis. FEATURES: Made of black plastic INCLUDES: One bulkhead SPECS: Length: 3" (76mm) Width: 2-13/16" (71mm)...

Overview Key Features Recognizes Traxxas iD batteries to automatically Program and optimize charger settings Charge progress indicator Optimized for faster LiPo balance charging One button LiPo...

This is the Bulkhead Front for the Traxxas 1/10 Rally VXL rally car and Slash 4x4 with LCG kit. FEATURES: Made of black plastic. INCLUDES: One bulkhead SPECS: Length: 5" (127mm) Width: 4-9/16"...

This is the Chassis for the Traxxas 1/10 scale Rally Race Car Series and LCG for the Taxxas Slash 4x4 Short Course Truck. FEATURES: Fiber construction, gray in color INCLUDES: Chassis for the...

These are the Cooling Head Gaskets for the Traxxas TRX 3.3 engines. FEATURES: 0.30mm is the stock thickness head gasket, use thicker gasket for fuels with high nitro content and thinner gasket for...

These are the optional 1.5° Aluminum Rear Stub Axle Carriers from Traxxas. FEATURES: Machined aluminum construction Anodized blue in color INCLUDES: Two Aluminum Rear Stub Axle Carriers Two...

This is the Piston and Sleeve for the Traxxas TRX 3.3 engines. FEATURES: ABC construction, (A)luminum piston mated to a (B)rass cylinder liner that is (C)hrome plated INCLUDES: Piston and Sleeve...

These are the axle housings (or hub carriers) used on the: Rad 2, Hawk 2, Eagle, Blue Eagle LS II and Nitro Rustler. The housings are molded of black nylon. Includes: 2 axle housings

This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins (TRAC4940) SPECS: Length: 98.4 mm (3.875") Width: 7.9 mm (0...

These are the Differential and Transmission Yokes for use on the Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction Black in color INCLUDES: Two Yokes Two 3x10mm Screw...

This is the Body for the Stampede from Traxxas. FEATURES: Clear lexan construction Pre-trimmed INCLUDES: One clear body One decal sheet with window, grill and lights decals REQUIRES: Body Mounts,...

This is the Aluminum Turnbuckle set for the Traxxas, Rustler and Stampede. FEATURES: Anodized aluminum construction, red in color Black nylon ball ends INCLUDES: Two 39mm front camber links...

This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm 1/16" diameter or 1.5mm Requires: Extra...

This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

Aluminum Turnbuckles & wrench, blue-anodized Traxxas’ aluminum turnbuckles make it easy to add strength and adjustability to your Traxxas model. These turnbuckles come in a fire-red or...

This is the Upper Chassis for the Traxxas Rustler and Bandit FEATURES: Black Plastic Construction INCLUDES: One Chassis REQUIRES: Rustler

Big Bore Aluminum Shock Set For the ultimate in bump and jump control, Traxxas Big Bore shocks are the perfect addition to your Traxxas model. Hard-anodized aluminum bodies, PTFE-coated shock bores,...

These are the Traxxas 49mm Turnbuckle Camber Links for the Bandit, Rustler VXL and Stampede VXL. FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends INCLUDES: Two...

This is the Chassis Upper Deck for the Traxxas Nitro Rustler. It supports the Steering Servo and strengthens the upper chassis area. FEATURES: Nylon Construction Black in color INCLUDES: One Upper...

THIS IS THE TRAXXAS TRX 3.3 RACING ENGINE WITHOUT STARTER. FEATURES: 1-PIECE IPS CRANKSHAFT, SLIDE-VALVE CARB, AIR FILTER, OIL, GLOW PLUG FOR USE IN ALL TRAXXAS TRX2.5 AND TRX 3.3 VEHICLES W/FLYWHEEL...

This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 scale Ready-to-Run Latrax SST Stadium Truck. FEATURES: Chassis: Molded composite nylon monocoque Drive: Four wheel shaft Motor: 370 brushed...

This is the Electric Powered, 2.4GHz Radio Controlled, 1/18 Scale, Ready to Run LaTrax Rally Car from Traxxas. FEATURES: Chassis: Molded fiber composite Drive: Four wheel, steel center driveshaft...

These are the Rear Suspension Arms for the Traxxas Electric SRT, Nitro Rustler, Nitro Sport and Nitro Stampede Kits. FEATURES: Durable Black plastic construction INCLUDES: One left suspension arm...

Hop-Up replacement Shock Caps (Big Bore) are designed to fit Traxxas Big Bore shocks: TRAC4960 Long Big Bore TRAC4961 Extra Long PACKAGE CONTAINS: 2-Caps FEATURES: Round aluminum caps with threaded...

These are Shock Caps and Bottoms for Traxxas kits. These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap...

These are the Blue Aluminum Shock Caps from Traxxas. FEATURES: Aluminum construction Anodized blue in color Fits all Ultra Shocks INCLUDES: Four Shock Caps REQUIRES: Installation on the shocks

This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Rear driveshaft assembly Screw pin REQUIRES: Installation on...

Body, Rustler, ProGraphix (replacement for the painted body. Graphics are printed, requires paint & final color application)/window, lights, decal sheet/wing & aluminum hardware FEATURES:...

These are the Differential Output Yokes for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes Two 3x5mm countersunk screws...