TRAXXAS

Overview The ultimate upgrade! The key to the Velineon's extreme power output is total system optimization. All of the components are carefully engineered to work seamlessly together. From the...

This is the TQ 2.4GHz 3-Channel Micro Receiver for use with the Traxxas TQ 2.4GHz Transmitter. FEATURES: Compatible with the Traxxas 3-channel #6517 transmitter and the older 2-ch #2238 TQ 2.4GHz...

High-grip Anaconda 2.2" performance street tires provide incredible tread life and traction and come pre-glued to popular Tracer 2.2" Mirror-Chrome wheels.

This is the clear Body for use with the Traxxas Jato stadium truck. FEATURES: Pre-cut clear lexan body with protective film covering Pre drilled body post holes INCLUDES: One replacement clear body...

Thids is the replacement lower chassis (or "tub" chassis) for the Traxxas Rustler and Bandit. Made of black reinforced nylon and has a molded-in channel down the center of the chassis for added...

Features Complete kit, no additional parts required Lowers chassis over one inch (1.3 in/33mm) Battery positioned 45% lower compared to standard chassis Low-CG enhances handling and increases...

This is the brushless electric powered, 2.4GHz radio controlled, ready to run 1/10 scale Traxxas Slash 4x4 Short Course Racing Truck. FEATURES: Chassis: Nylon composite construction Drive: Four...

This is the Traxxas 7-Cell 8.4V 3000mAh iD Power Cell NiMH Stick Battery Pack FEATURES: New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD...

These are the Rear Shock Springs for the 2WD Traxxas Slash. FEATURES: Metal construction White in color INCLUDES: Two Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS: Length,...

These are the Front Shock Springs for the 2WD Traxxas Slash. FEATURES: Metal construction, prgressive rate White in color INCLUDES: Two Front Shock Springs REQUIRES: Installation on the Traxxas...

This is the replacement servo saver for the following Traxxas kits: Rustler and Stampede. The servo saver is spring loaded and has adaptors for both Futaba and Airtronics servos. Features: White...

This is the Traxxas AC to DC Power Supply Adapter. FEATURES: Designed specifically for use with the Traxxas peak detecting DC 2-4A fast chargers and allows them to be powered from a standard 110V AC...

This is the Glow Powered, 2.4GHz Radio Controlled, Ready to Run, 1/10 Scale Nitro Slash Short Course Racing Truck from Traxxas. **The included TQ 2.4GHz radio system is compatible only with the**...

This is the replacement Fuel Tank Cap O-Rings for the Traxxas Revo model. FEATURES: Rubber construction, orange in color INCLUDES: Two rubber o-rings REQUIRES: Installing onto the fuel tank...

These are the Countersunk 4mm x 10mm Screws for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES:...

Features Ergonomically designed case with comfortable rubber grips Features TQ 2.4GHz radio system Waterproof electronics all-weather, all-season R/C excitement Watertight receiver box and #2216...

These are replacement stub axle pins for the Nitro Buggy, Nitro Street, TRX-3, Rad 2, TRX-1, Hawk 2, and Blue Eagle LS II. These pins slide through the axle and hold the wheel to the axle. INCLUDES:...

These are the Rear Stub Axles for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS: Length: 1.65"...

This is a set of telescoping drive shafts for the Blue Eagle LS II. Includes: 2 white nylon telescoping shaft (each shaft is made of two pieces) 4 aluminum U-joints

These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS: Length: 12mm Diameter: 3mm

Overview Traxxas progressive-rate springs are custom-wound to provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts. Spring rates are identical to...

Overview Traxxas progressive-rate springs are custom-wound to provide responsive control for small bumps, with a progressively stiffer rate to absorb harder impacts. Spring rates are identical to...

This is a Traxxas 48P, 76T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 76 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One...

This is a Traxxas 48P, 83T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 83 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One...

This is a Traxxas 48P, 86T Spur Gear for models with Torque Control Slipper Clutch. FEATURES: 48 pitch 86 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One...

Features: Equipped with the Traxxas high-current connectors for restriction-free current flow Innovative watersealed design 15-turn motor limit for 540 size motors 12-turn motor limit for 550...

This is the electric powered, 2.4GHz TQ radio controlled, 1/10 scale RTR Slash All Terrain Truck from Traxxas with the F-150 Raptor SVT Body. **The included TQ 2.4GHz radio system is compatible only...

This is the 2.4GHz radio controlled, electric powered, ready to run, 1/10 scale Traxxas Slash Short Course Race Truck. Red Version. FEATURES: Chassis: Modified tub 0.08" (2mm) thick composite nylon...

This set of rod ends, balls, and screws is used on all but four of Traxxas' kits. It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes: 4 short rod ends (17mm) 16 long rod...

This is a Rod End Set for the Traxxas Revo used with the optional GTR shocks. FEATURES: Plastic construction Black in color INCLUDES: Six Rod Ends REQUIRES: Assembly to vehicle SPECS: Length: 18.35mm...