TRAXXAS

This is the Rear Ring Gear and Differential Pinion Gear for the Traxxas X-Maxx Monster Truck, TRAD75**. ...

This is the Front Ring Gear and Differential Pinion Gear for the Traxxas X-Maxx Monster Truck, TRAD75**. ...

This is the ProGraphix Body for the Traxxas X-Maxx Monster Truck. FEATURES: Trimmed with printed graphics...

This is a pair of Traxxas Short Course Front Tires and Wheels. FEATURES: Fits the front of 2WD short course...

his is the Traxxas 2.5R Racing Engine with IPS (Integrated Pilot Shaft) and Pull-Start. For use in all Traxxas vehicles that use the TRX 2.5 engine. ...

This is a pair of the Steering Blocks. These Blocks support the Wheel Hubs and connect to the Front Suspension Arms and Steering Tie Rods. ...

This is a pair of the Steering Blocks for the Traxxas Nitro and Electric Powered 4-Tec Touring Cars. These Blocks support the Wheel Hubs and connect to the Front Suspension Arms...

This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome suspension pins and three "E" type...

This is the 1/10 scale RTR 2.4GHz Radio Controlled Traxxas Nitro T-Maxx. FEATURES: TQ 2.4GHz radio, 2.5 engine w/EZ Start, rubber sealed bearings, 2sp auto transmission, 4 wheel shaft drive, 3mm T6...

This is the Propellor Shaft and Flex Cable for the Traxxas Spartan. FEATURES: Steel construction ...

This is the stock 42x59 Propeller for the Spartan Boat from Traxxas. FEATURES: Black nylon construction ...

This is the Water Motor Cooling Jacket for the Spartan Boat from Traxxas ...

This is the Aluminum Heat Sink for the Traxxas Velineon 380 Brushless Motor. FEATURES: Aluminum construction,...

This is the Rudder Pushrod Assembly for the Spartan Boat from Traxxas FEATURES: Pre-assembled pushrod ...

This is the Traxxas Air Filter Housing for the T-Maxx 2.5. This attaches to the throat of the carburetor. FEATURES: Black plastic air filter housing with cover screen and changeable...

This is the Traxxas replacement #3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks along with the Black Long Shocks (TRAC9160) and Black...

Velineon 3500 Rebuild kit, includes plastic endbell, 5x11x4mm ball bearings (2), 2.5x5mm BCS (with threadlock) (4), front and rear bushings

This is the Traxxas Aluminum Antenna Crimp Nut. FEATURES: Anodized red aluminum crimp nut ...

This is a package of three Air Filter/Pre-Filter Foam Inserts for the Traxxas .20 cu in (3.3cc) racing engine. ...

This is an optional Wheelie Bar for the Traxxas Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, Pink in color Installs at rear of chassis to prevent vehicle from...

This is the optional Clear Body for the Traxxas X-Maxx Monster Truck, TRAD75**. FEATURES: Molded from clear...

Body, Stampede VXL, ProGraphix (replacement for the painted body. Graphics are printed, requires paint & final color application)/ window, grill, lights decal sheet.   This is the Traxxas...

This is the Large Rod End Set for the Traxxas Revo. FEATURES: Plastic construction ...

This is the Replacement Extended Cab Pick-Up Body for the Traxxas E-Maxx Truck. This is the thin, clear plastic piece...

This is the CV Style Stub Axle for use on the Traxxas Summit Truck RTR FEATURES:...

This is the Set of Axle Pins for the Traxxas T-Maxx 4WD RTR Monster Truck. These pins go through the stub axles on each wheel, the wheel hubs are then placed over these pins. ...

This is an optional Wheelie Bar for all Traxxas Maxx series vehicles. FEATURES: Constructed of hardened plastic,...

These are the Optional Axle Carriers L & R for use on the Traxxas Revo series. FEATURES:...

These are the Rear Left and Right Suspension Arms for the Traxxas Nitro Jato Stadium Truck. ...

These are the Aluminum Shock Caps for the Traxxas GTX Shocks for the Traxxas X-Maxx. FEATURES: Aluminum...