JQ RACING

THE JQRacing Wheel Bearing Spacer Set includes 4pcs, enough for one car. These crush spacers are added between the wheel bearings to prevent the bearings from binding when the hex pin grubscrew is...

THE JQRacing Centre Bevel Gear Outdrive Set includes two outdrives, with the needed M5x4 grubscrews. These outdrive cups are installed on the front or rear bevel gear, and are used to transfer the...

THE JQRacing Upper Link (Camber Link) Turnbuckle Set includes four Camber Link Turnbuckles that are used in either the front or rear. These are used to adjust the camber and roll center on the...

THE JQRacing 6mm Steering Servo Link Ball Set includes two pivot balls that are used in the steering servo link rod ends. One ball is threaded with a 5.5 hex shape, and the other is just a simple...

THE JQRacing 7mm Outer Steering Ball Set includes four pivot balls that are used in the outer steering links on the original YE, THEeCar and THERTR, and both inner and outer links on all new cars.

THE JQRacing 7mm Upper Link Ball Set includes four steel balls. These are the outer camber link pivot balls that are installed in the front or rear camber link rod ends and attached to the hubs.

THE JQRacing 7mm Threaded Ball with Nut Set includes four steel balls. These are the inner camber link pivot balls that are installed in the front or rear camber link rod ends and attached to the...

THE JQRacing Servo Saver Post Set includes both posts needed for a car. These posts are installed on the chassis, and hold the servo saver components in place.

THE JQRacing Fuel Tank Grommet Set includes 2pcs of these rubber bits. These grommets are used to help absorb vibration from the chassis to the fuel tank.

THE JQRacing Rear Differential Bearing Insert, just in case you don’t want to buy the complete rear gearbox but want to replace the bearing insert.

THE JQRacing Swaybar Holder Set includes two swaybar holders, one for the front, and one for the rear.

THE JQRacing Chassis Braces includes one front, and one rear brace. The rear brace is the original design, and as such is only compatible with THEeCar, the original THECar, and the...

THE JQRacing 7mm Ball For Shocks are optimised for the lower plastic shock end, making it easy to fit them in the arm.

THE JQRacing 20 degree C Hub (Right) (BE/WE)

THE JQRacing 20 degree C Hub (Left) (BE/WE)

THE JQRacing Flywheel with Nut and Collet is the flywheel used for the JQ CNC 3 shoe clutch. This is the flywheel we run!

THE JQRacing 1.0mm Clutch Spring Set includes 3 springs.

THE JQRacing 7mm Ball For Shocks are optimised for the lower plastic shock end, making it easy to fit them in the arm.

THE JQRacing Brake Pad Set includes four brake pads, enough for one car.

THE JQRacing Throttle Linkage Kit, includes all the components necessary to rebuild the throttle linkage.

THE JQRacing Tank Puller Set includes 2pcs of this plastic tank puller. It does not include a screw, because it works better without it, simply attach the puller to the tank, and you are...

THE JQRacing M3 Countersunk Washers 10pcs (Gold) Bling Bling

THE JQRacing M4 Countersunk Washers 10pcs (Gold) Bling Bling

THE JQRacing M4 Countersunk Washers 10pcs (Blue) Bling Bling

THE JQRacing M4 Countersunk Washers 10pcs (Green) Bling Bling

THE JQRacing Aluminum Wingmount Posts (3pcs Green) are replacements for the stock plastic parts. They reduce flex, and increase rigidity of the rear wing mount, but in reality, are mainly a...

THE JQRacing Aluminum Wingmount Posts (3pcs Gold) are replacements for the stock plastic parts. They reduce flex, and increase rigidity of the rear wing mount, but in reality, are mainly a...

THE JQRacing Swaybar links include 2pcs plastic links, and 2pcs of each steel ball needed for mounting the links on the car.

THE JQRacing Airfilter Holder includes the filter housing, and filter neck.

THE JQRacing White Edition / THEeCar Body, includes window stickers and comes unpainted. Please use the window stickers, you don’t want to be THAT guy do you?