RC-PROJECT

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The new Shock Caps are made in Italy in Ergal 7075 T6 and then hard anodized and branded with the RC-Project Logo on the front. The 6 upper lightenings have a dual purpose, they allow to reduce the...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Spring Kit Ø.9 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

Spring Kit Ø1.1 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

Spring Kit Ø1.0 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

The Weight made in Brass is perfectly integrated into the overall dimensions without touching any component and leaving the necessary space for any bending of the chassis.Thanks to the M3 threaded...

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The New Standoff +5 are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The Steering Post are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of...

The new Rear hub carrier hinge pins RC-Project are made of Spring Steel, the M3 thread has undergone a drastic change compared to the originals to eliminate the problems due to the breakage of...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The Steering Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Shock Pins are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Shock Pins are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...