RC-PROJECT

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

- Custom Glue Formula Specifically Designed for Maximum Bond with Tires- Super-Fast and Crystal Clear Drying- Maximum Strength Bond - Cyanoacrylate. Danger. Bonds skin and eyes in seconds.- Use with...

The new "Limited Version" Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will...

The New Standoff are made of Spring Steel and subsequently treated to have a very low wear, thanks to the new design you can vary the length from 0 to + 3mm simply by moving the thickness. The...

The Steering Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness...

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The New Standoff +5 are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The Steering Post are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The new Shock Caps are made in Italy in Ergal 7075 T6 and then hard anodized and branded with the RC-Project Logo on the front. The 6 upper lightenings have a dual purpose, they allow to reduce the...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Spring Kit Ø.9 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

Spring Kit Ø1.1 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

Spring Kit Ø1.0 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako