This is the glow powered, 2.4GHz radio controlled, ready-to-run Traxxas Nitro Rustler 1/10 scale Stadium Race Truck with Traxxas Stability Management. **The included TQ 2.4GHz radio system is compatible only with the** **#6519 receiver and does NOT accept the Docking Base accessory.** FEATURES: Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned or turned off by adjusting the multi-function knob on the TQi transmitter or the slider in the Traxxas Link app Chassis: T-6 aluminum anodized blue with fiber composite upper plate/front brace Radio: Traxxas TQ 2.4GHz radio system Engine: Traxxas 2.5 racing engine with EZ-Start electric starter, slide valve carb, two glow plugs, air filter and cylinder head protector, battery and charger for EZ-Start Exhaust: Composite tuned pipe with aluminum header Drive: Rear wheel with telescoping U-joint drive shafts Body: Pre-painted, pre-cut polycarbonate body Shocks: Four composite bodied oil-filled Slipper Clutch: Adjustable Suspension: 4-wheel independent Transmission: Ball bearing equipped, Magnum 281 Differential: Planetary gear with steel internal gears Fuel Tank: 2.5oz (75cc) with flip-top lid and primer bulb Brake: Composite disc type Spur Gear: Nylon, 70 tooth 32-pitch Wheels: Chrome 2.0" (51mm) wide, 2.8" (71mm) diameter five-split spoke Jato Tires: Front, ribbed 2.8" (71mm) inner diameter, 2" (51mm) wide Rear, Traxxas Alias 2.8" (71mm) inner diameter, 2" (51mm) wide Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis suspension when viewed from the side of the car in relation to the chassis INCLUDES: Assembled Nitro Rustler with TRX-2.5 racing engine and glow plug, TSM, EZ-Start electric starter, painted body with rear wing, decals, 2.4GHz radio system, tuned pipe, instruction sheet, extra glow plug, fuel bottle, tools, battery & charger REQUIRES: "AA" Batteries: 8 (4 for transmitter and 4 for receiver) Fuel: Car fuel with 10-15% nitromethane content Misc. Items: Building and track equipment
REPLACING EZ STARTER WITH STANDARD RECOIL STARTER To convert the EZ starting to a standard pull starter, purchase part numbers TRAG5170, TRAP5211 one-way bearing, 4 3x8mm machine screws, take out the three bolts on the EZ-Starter, clip the wires on the EZ-Starter, and install recoil pullstart.