TRAXXAS

Mud guards, rear, Green (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2) Add more style to your Sledge® with these colorful left and right rear mud guards. Includes mounting screws...

Body reinforcement set, Red/ skid pads (roof) (fits #9511 body)     Replacement part for these models:   Sledge™ Sledge™: (Model# 95076-4)  

Body reinforcement set, black/ skid pads (roof) (fits #9511 body)     Replacement part for these models:   Sledge™ Sledge™: (Model#...

Axle carriers, left & right (1 each)     Replacement part for these models: Unlimited Desert Racer®    

Box, receiver (sealed)/ foam pad/ 2.5x8mm CS (4)/ 3x10mm CS (2) Sealed receiver box for Traxxas micro receivers. Includes foam pad, silicone seal, grease, 3x10 mm screws (2), and 2.5x8 mm screws...

Motor mount, aluminum (upper and lower)/ motor mount spacer/ hardware      Replacement part for these models:   Sledge™ Sledge™: (Model#...

Body posts, front & rear   Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer   TRX-4® Equipped with...

Springs, shock (natural finish) (GTS) (0.61 rate, blue stripe) (2) Traxxas GTS shock springs allow you to compensate for lighter or heavier vehicle configurations. The higher the spring rate...

Y-harness, BEC to LED light set The Y-harness sends power to accessory LED light kits when using the 2260 BEC.   Replacement part for these models:   Rustler®...

  LED light harness, rear (requires #5838, 6737X, 6777X, or 6836X rear bumper) Replacement rear LED lights for LED light kits. Fits 5838, 6737X, 6777X,...

Suspension arms, front & rear (4) Suspension arms, front & rear (4) Replacement part for these models: 1/18 LaTrax® Rally  

Body reinforcement set (fits #6717 body) The Rustler 4X4 body reinforcement sets provide added protection for your Rustler 4x4 during extreme driving. These high-strength composite...

Battery strap (for 2200 2-cell and 1400 3-cell LiPo batteries) Use the TRX-4® hook-and-loop battery strap to secure smaller format batteries like...

Receiver box cover (for use only with #8224 receiver box & #2260 BEC)/ foam pads/ seals/ silicone grease Replacement expanded receiver box cover for use with 2260 BEC...

Portal drive input gear, rear (machined) (left or right) (requires #8063 rear axle) Replacement portal input drive gear for rear heavy-duty Chromoly axles is machined from high-grade 4340 Chromoly...

Portal drive input gear, front (machined) (left or right) (requires #8060 front axle shaft) Replacement portal input drive gear for front heavy-duty Chromoly axles is machined from high-grade 4340...

Shock caps, GTX shocks/ spring perch/ adjusters/ 2.5x14mm CS (2) (for 2 shocks)    

LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD...

Grille, Bigfoot® No. 1 (chrome)/ decals/ adhesive tape/ mounting hardware Replacement chrome BIGFOOT® No. 1 grille. Includes decals, adhesive tape, and hardware. Replacement...

Springs, front (black) (2) Black springs for front Traxxas Ultra Shocks (2) Accessory part for these models: Rustler® 4X4 Slash 4X4 VXL Slash 4X4 Stampede® 4X4...

Body, GTR long shock, aluminum (orange-anodized) (PTFE-coated bodies) (1) Replacement orange-anodized aluminum long 1/10 scale GTR shock body. One per package. Accessory part for these...

Tires & wheels, assembled, glued (12-spoke white wheels, slick tires) (2) Tires & wheels, assembled, glued (12-spoke white wheels, slick tires) (2)

Wheel hex clips (6)  

Linkage, sway bar, rear (2) (assembled with hollow balls)/ sway bar arm (left & right)     Replacement part for these models: Unlimited Desert...

Tailgate panel/ tailgate retainers (2)/ tailgate mount/ tail light lens (2) (left & right)/ 2.5x8 BCS (4) (fits #8111 or #8112 body) Tailgate panel for TRX-4® Sport body. Includes template,...

Wheelie bar mounts/ rear skidplate (fits 4WD Stampede®) (for LED light kit installation) Replacement wheelie bar mounts and skid plate for 6794 4WD Stampede LED light kit...

Push rods, aluminum (Red-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and...

Push rods, aluminum (Green-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and...

Steering bellcranks/ servo saver/ servo saver spring/ servo spring retainer/servo horn, steering   Replacement part for these models: Unlimited Desert...

Push rods, aluminum (blue-anodized), heavy duty (2) (assembled with rod ends and threaded inserts) Heavy-duty aluminum push rods are formed from tough 7075-T6 alloy for maximum strength and...