TRAXXAS

Heavy-duty X-Maxx suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the...

Body reinforcement set, blue/ skid pads (roof) (fits #9511 body) Colorful molded body reinforcements transfer impact forces to the Sledge's® full-body frame, ensuring long-lasting fun...

Outdrive housing/ propeller shaft/bushings (self-lubricating) (2) Boat outdrive with propeller shaft and self-lubricating bushings (2) Replacement part for these...

Heavy-duty X-Maxx suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the...

Tires & wheels, assembled, glued (12-spoke red chrome wheels, slick tires) (2) Give your LaTrax Rally a new set of treads with these pre-glued wheel and tires. Slick racing tires come...

Mud guards, rear, (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2) Add more style to your Sledge® with these colorful left and right rear mud guards. Includes mounting screws...

Mud guards, rear, Red (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2) Add more style to your Sledge® with these colorful left and right rear mud guards. Includes mounting screws...

Servo horns, steering, long (2), short (2)/ linkage, steering (3x20mm turnbuckle) (2)/ rod ends (short) (4)/ hollow balls (4) Two long and two short steering servo horns. Includes two 3x20 mm...

LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Rustler® or Bandit®) Traxxas LED light kits are built tough,...

Mirrors, side (left & right)/ snorkel/ mounting hardware (fits #8111 or #8112 body) Replica side mirrors and snorkel for TRX-4® sport body. Includes template and hardware. Fits 8111 and...

BEC, complete (12.6 volts (3s LiPo) maximum input voltage) (includes receiver box cover and seals) Traxxas recommends the High-Output BEC, or battery eliminator circuit, as a required accessory when...

Servo mount, 2-speed/ servo mount, T-Lock/ wire clips Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021...

Wing/ wing retainer/ 2.6x12mm BCS (4) (fits #9421 body) fits:  

Shocks, GTS, silver aluminum (assembled with spring retainers) (2) Oil-filled GTS coilover shocks tame even the roughest trails with their silky-smooth damping performance. The aluminum shock bodies...

TRX-4 SPORT LIGHT KITS Hit the Trail Day or Night with Rock-Solid Reliability     Genuine Traxxas LED light kits for the TRX-4 Sport are engineered with the same outstanding quality...

Mud guards, rear, Blue (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2) Add more style to your Sledge® with these colorful left and right rear mud guards. Includes mounting screws...

Springs, rear (blue) (2) Blue springs for rear Traxxas Ultra Shocks (2).  Accessory part for these models: BIGFOOT® No. 1 Officially Licensed Replica Ford® F-150 Raptor Hoss®...

Skidplate, front (1), rear (1)/ rubber impact cushion (2)  

Tires & wheels, assembled, glued (12-spoke chrome wheels, slick tires) (2) Give your LaTrax Rally a new set of treads with these pre-glued wheel and tires. Slick racing tires come pre-mounted to...

LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits 2WD Slash®) Traxxas LED light kits are built tough, with factory fit...

LED light set, complete (includes front and rear bumpers with LED lights & BEC Y-harness) (fits 2WD Stampede®) Traxxas LED light kits are built tough, with factory fit and finish for easy...

Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4) Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and...

Rebuild kit, Velineon® 380 (4x9x4mm ball bearings (2), 2x6mm CCS (with threadlock) (2), front shims (2)) Rebuild kit for the Velineon 380 brushless motor. Includes 4x9x4 mm bearings (2), 2x6...

LED light set (contains headlights, tail lights, side marker lights, distribution block (fits #8130 body, requires #8028 power supply)The Traxxas TRX-4 LED 1979 Blazer Light Kit takes scale...

Mud guards, rear, orange (left and right)/ 3x15 CCS (2)/ 3x25 CCS (2) Add more style to your Sledge® with these colorful left and right rear mud guards. Includes mounting screws...

Chassis brace, rear (fits E-Revo®/Summit) Reinforce your chassis with this blue-anodized aluminum rear chassis brace. Accessory part for these models: E-Revo® VXL...

Mount, telemetry expander (fits Stampede® 2WD) The telemetry expander mount provides a secure base to mount the optional TQi™ Telemetry Expander. Accessory part for these...

LED light set (contains headlights, tail lights, side marker lights, distribution block (fits #8130 body, requires #8028 power supply) The Traxxas TRX-4 LED 1979 Blazer Light Kit takes scale...

Motor heat sink (1) Aluminum heat sink for 540-size Stinger electric motors. Does not fit Velineon or Titan motors.  

Heavy-duty X-Maxx suspension arms utilize our latest proprietary composite material for extreme durability. Traxxas designed this composite specifically for high loads and hard landings with just the...