TEAM ASSOCIATED

Team Associated B6.1/B6.1D Gear Differential Case. Package includes diff case, cover and cross pins.  

Team Associated B6.1/B6.1D Shock Tower Covers. These are the replacement shock tower covers used on the B6.1 and B6.1D models. Package includes one front shock tower cover and one rear shock tower...

These are the springs for the front of most on-road cars. Heavy and light springs are available depending on the track conditions. 2 per package.

This is a pack of two replacement ATD differential T-nuts from Team Associated. These are the nuts that the differential thrust bolt threads into.  

This is a replacement Team Associated 106mm Center Universal Driveshaft, intended for use with the RC8B3 Nitro Buggy. This driveshaft is assembled and ready for installation, but does not include a...

This is a replacement Team Associated 106mm Center Universal Driveshaft, intended for use with the RC8B3 Nitro Buggy. This driveshaft is assembled and ready for installation, but does not include a...

This is a pack of twenty replacement Team Associated 2.5mm Washers, and are intended for use with the Associated RC8 family of vehicles.  

This is a pack of two replacement Team Associated "Hard" 4-Shoe Composite Clutch Shoes.

FT Aluminum Clamping Servo Horn 23T, 15.5 mmMade for 6-series off-road vehicles, these 7075 T6 aluminum clamping servo horns come with a large M2.5 screw and laser-etched spline size for positive...

FT Aluminum Servo Horn 23T, 18.5 mm Designed for the steering servo in the RC8B3, RC8B3e, RC8T3, and RC8T3e. These new machined aluminum servo horns are stronger than the stock plastic ones that come...

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.    

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.   

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.   

This is a pack of two Team Associated 4-Shoe Clutch Flywheel Collets. 

This is a pack of four replacement Team Associated RC8B3.1 Turnbuckle Balls.    

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel Nut.   

This is a replacement Team Associated 4-Shoe Clutch Shoe Pin Set. Includes: (4) Clutch Shoe Pins, 4 Shoe Clutch(6) Washers, 5x8x0.2(4) Washers, 3x8mm, black(1) Screws, M3x0.5x8mm SHCS

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel, with an included collet and four clutch shoe pins.  

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes.  

This is a replacement Team Associated 46 Tooth RC8B3.1 Spur Gear.   

This is a pack of four replacement Team Associated RC8B3.1 Shouldered Turnbuckle Balls.  

This is the Team Associated 4mm RC8B3 and RC8B3.1 Rod End Set, including two straight ends and two bent ends.   

This is the Team Associated 5mm RC8B3 Rod End Set, including two straight ends and two bent ends.   

Clutch Bell 14T, vented, 4 shoe