TEAM ASSOCIATED

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.    

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.   

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs.   

This is a pack of two Team Associated 4-Shoe Clutch Flywheel Collets. 

This is a pack of four replacement Team Associated RC8B3.1 Turnbuckle Balls.    

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel Nut.   

This is a replacement Team Associated 4-Shoe Clutch Shoe Pin Set. Includes: (4) Clutch Shoe Pins, 4 Shoe Clutch(6) Washers, 5x8x0.2(4) Washers, 3x8mm, black(1) Screws, M3x0.5x8mm SHCS

This is a replacement Team Associated RC8B3.1 4-Shoe Flywheel, with an included collet and four clutch shoe pins.  

This is a pack of four Team Associated Clutch Springs for use with the RC8B3.1 4-Shoe Clutch. The stock setup is two 0.90mm springs and two 0.95mm springs. 

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a replacement Team Associated Vented 13 Tooth Clutch Bell for use with the 4-Shoe Clutch.   

This is a pack of two replacement Team Associated "Hard" 4-Shoe Aluminum Clutch Shoes.  

This is a replacement Team Associated 46 Tooth RC8B3.1 Spur Gear.   

This is a pack of four replacement Team Associated RC8B3.1 Shouldered Turnbuckle Balls.  

This is the Team Associated 4mm RC8B3 and RC8B3.1 Rod End Set, including two straight ends and two bent ends.   

This is the Team Associated 5mm RC8B3 Rod End Set, including two straight ends and two bent ends.   

Clutch Bell 14T, vented, 4 shoe

This is a pack of two optional Team Associated 17mm Differential Outdrives. These are used on the front of the RC8B3.1

This is a pair of Stock V2 Front Springs with Yellow Firmness Rating for the Team Associated RC8B3.1 and RC8B3.1e. FEATURES: Steel construction, black in colorStock replacement front springs...

This is a pair of Factory Team TC Springs with Whitye 13.8lb/in Firmness Rating. FEATURES: Steel construction, black in color with white sections of tubing to indicate firmness...

This is the Standup Gearbox for the Team Associated RC10B6D Buggy. FEATURES: Composite plastic construction INCLUDES: Left and Right Gearbox Halves COMMENTS: If the Laydown Gearbox for the RC10B6...

This is a pair of "new" inline steering blocks for the Associated RC10 seriescars.(the RC10T too). This part MUST be used with the aluminum inline axles(ASCC2320). Included are two black nylon...

These are Replacement 30° Front Castor Blocks for the Associated RC10T3.These mount to the front suspension arms and the knuckles mount to it. FEATURES: Nylon Construction.Black in Color.Has...

This is a replacement Team Associated RC8B3.1 Shock Seal Bushing Set, including four machined shock o-ring spacers and four machined shock o-ring hat bushings.   

This is the Factory Team 30g Chassis Weight for the Team Associated RC8B3.1 and RC8B3.1e Buggy Kits. FEATURES: Machined brass construction Allows driver to adjust front and rear weight...

This is the 94mm CVA Driveshaft Set for the Team Associated RC8B3 series. FEATURES: Hardened steel constructionFits the Team Associated RC8B3, RC8B3.1, RC8B3.1e and RC8B3e INCLUDES: Two each, 94mm...

This is the 94mm CVA Driveshaft Set for the Team Associated RC8B3 series. FEATURES: Hardened steel constructionFits the Team Associated RC8B3, RC8B3.1, RC8B3.1e and RC8B3e INCLUDES: Two each, 94mm...