MUGEN SEIKI

Mugen Seiki MBX7 replacement chassis - Aluminum

This is the Mugen Seiki Decal Sheet. FEATURES: Precut for easy peel and stick application Two each of eight different size "Mugen Seiki" logos in white, gray, purple, blue and black color...

This is the Mugen Seiki Chrome Decal Sheet. FEATURES: Precut for easy peel and stick application Two each of eight different size "Mugen Seiki" logos in chrome, gray, purple, blue and black color...

SPUR GEAR 44T: X7

MUGEN ALUMINUM FRONT LOWER SUSPENSION ARM MOUNT REAR: X7

Mugen Seiki Complete Bushing Set, and is intended for use with the Mugen MBX7 1/8 scale nitro buggy. This complete set includes all of bushings used in the suspension mounts to adjust toe angle,...

MUGEN FUEL TANK RUBBER BUSHINGS (2)

Mugen Aluminum Flywheel: X7,X6, X5R, X5T

MUGEN SHOCK DIAPHRAM MBX7/6/6T

MUGEN SUSPENSION ARM SPACERS

This is the Radio Box/Battery Tray for the Mugen MBX7 ECO. FEATURES: Composite plastic construction Battery tray designed for two 2 cell LiPo batteries or a single 4 cell LiPo battery Two piece...

This is the Servo Saver Arm for the Mugen MBX7 and MBX7R Off Road Buggy Kit both Nitro and ECO. FEATURES: Aluminum construction INCLUDES: Aluminum Servo Saver Arm

Mugen's MBX7 Steel Spur Gear is available in multiple tooth count options to fine tune the gear ratio of your model.  

These are the Damper Pistons for use on the Mugen 1/8 MBX6 Buggy Kit FEATURES:...

This is a Mugen 2.8mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

This is a Mugen 2.7mm rear anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

This is a Mugen 2.3mm front anti-roll bar, and is intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.

Muegen Seiki Camber Link Pivot Ball (4)

These are the Ball Links for the Mugen MBX5T/R. FEATURES: Nylon construction, black in color Replaces worn or damaged ball links INCLUDES: 4 nylon ball links for the Mugen MBX5T/R REQUIRES:...

These are the Damper Cap Bushings for the Mugen 1/8 MBX6 Buggy Kit FEATURES: Nylon construction Black in color INCLUDES: Four Damper Cap Bushings REQUIRES: Installation on the vehicle

Mugen front track width adjustment spacers, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.  

These are the Front Lower Pillar Kingpin Balls for the Mugen 1/8 MBX6 Buggy Kit FEATURES: Aluminum and steel construction ...

This is the Mugen RIII Pro Starter Box for Off-Road Vehicles. FEATURES: Powered by two 540 motors Fully adjustable locating pins Rear handle design so that the placement of the glow starter does not...

This is the Front Anti Roll Bar 2.2mm for use on the Mugen MBX67 buggy. FEATURES:Metal construction INCLUDES:One Front Anti Roll Bar REQUIRES:Installation SPECS:Outer Diameter: 2.2mm

This is a Universal Joint Shaft Set for the Mugen MBX. Buggy. FEATURES:Metal constructionBlack in color INCLUDES:Two joint shafts for the Mugen MBXTwo 4mm set screws SPECS:Length: .39"...

This is the #650 Weight Super Silicone Shock Oil from Mugen. FEATURES:Will not thin out in hot weather or thicken up in cold weatherMay be used in any shock where this weight oil is required...

This is the electric powered, radio controlled, 1/8 scale Mugen MBX7-ECO M-Spec Off Road Buggy Kit. FEATURES: Chassis: A7075 T6 aluminum 0.12" (3mm) thick Drive: Four wheel three differential...

This is the 2.6mm Rear Anti Roll Bar for use on the Mugen 1/8 MBX6 Buggy Kit FEATURES: Steel construction INCLUDES: One 2.6mm Rear Anti Roll Bar REQUIRES:Installation on the vehicle SPECS:...

These are the replacement Clutch Springs for the Mugen MBX-4. These are located around the clutch shoes. This is a set of stock 1.0mm clutch springs. This is the most common clutch spring for the...

This is a pack of three optional Mugen Seiki 1.10mm Clutch Springs. These springs use 1.10mm thick wire, making them hard.  You can fine tune the way the clutch engages by using different...