MUGEN SEIKI

This is a set of replacement steering rack bushings for the Mugen MBX5 family of buggies. These are the bushings that go into the steering ackerman plate, and connect the ackerman plate to the...

This is a set of small flanged pivot balls for Mugen cars, usually used for steering linkages.   

This is a pack of four link balls for Mugen buggies, trucks and sedans.  

Mugen Seiki Machined "B" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134)...

This is a replacement Mugen MBX8 Clamping Servo Saver Spring Adjuster.   

This is a pack of two replacement Mugen MBX8 Rear Upper Camber Link Tie Rods.   

This is a set of two Mugen front or rear axle shafts, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.   

This is a set of two Mugen front or rear universal driveshafts, and are intended for use with the Mugen MBX6 1/8 scale buggy.  

This is a set of optional titanium rear camber rods for the Mugen MBX5 buggies. These are lighter and stronger than the stock parts.  

Mugen Seiki Machined "A" Rear Hub Carrier Bushing Set. These bushings are compatible with MBX7 vehicles that are equipped with the optional Aluminum Universal Driveshaft Rear Hub Carriers (MUGE2134)...

This is a pack of 8 3x16.8mm wheel hub pins for the Mugen MBX5 family of buggies. These are the small pins that are used to secure the wheel hubs to the axle drive shafts on the buggy.    

This is a set of four replacement Mugen 2.5x14.8mm Universal Joint Pins, and are intended for use with the Mugen MBX6 and MBX6T 1/8 scale vehicles.  

This is a replacement Mugen MBX8 Brake Cam and Lever Set, including two cams, and two levers.   

Graphite Front Lower Suspension Arm Mount Plate 2pcs (1mm): X8

This is a pack of two optional Mugen 1.2mm MBX8 Graphite Rear Lower Arm Plates. These plates attach to the suspension arm to increase stiffness. Mounting hardware not included.

This is a pack of two optional Mugen MBX8 Aluminum Servo Saver Shafts.  

This is the optional titanium servo tie rod for the Mugen MBX5 buggies. This rod will be much lighter and stronger than the stock piece. If you are racing your buggy regularly, you should consider...

This is a pack of two replacement Mugen MBX8 Servo Saver Shafts. This shaft pair weighs 15 grams.

This is a set of replacement joint pins for the universals used in the Mugen MBX5 buggies, and are used to hold the universal joint together and go through the axle shafts and the joint shaft. 

This is an optional Mugen MBX8 Graphite Front Upper Steering Plate, with two included Servo Saver Spacers and hardware.   

This is an optional Mugen 4mm Thick Graphite Front Shock Tower for the MBX8.   

This is an optional Mugen 4mm Thick Graphite Rear Shock Tower for the MBX8.   

This is a replacement Mugen MBX8 Body Mount and Front Upper Plate Set.   

This is a replacement Mugen MBX8 Center Differential Mount.   

This is a pack of two replacement Mugen Rear Hub Carrier Hinge Pins, and are intended for use with the Mugen MBX7 1/8 scale nitro buggy. These hinge pins secure the rear hub carrier to the rear arm.

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the rear gearbox, in the rear location.  

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the front location.   

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the front gearbox, in the rear location.   

This is a replacement Mugen MBX8 Aluminum Lower Arm Mount, for use on the rear gearbox, in the front location.    

This is a replacement Mugen MBX8 Graphite Radio Tray.