This is the 1/10 scale electric powered, radio controlled, Associated RC10 B4.2 Factory Team off-road buggy kit.

FEATURES: Chassis: +8mm B4 composite tub type
Drive: Two wheel with CVA drive shafts with pin retainer clips with steel center-drilled front axles
Transmission: 2.6:1 laydown type, high-torque capacity with VTS
slipper clutch (variable torque, multi-plate slipper with 3 drive surfaces)
Ball Bearings: Full set, 14 rubber sealed
Shocks: Factory Team 12mm Big Bore hard anodized aluminum with TiN "Gold" 3mm shock shafts
Shock Towers: Optimized for the Big Bore shock
Motor Plate: Factory Team blue aluminum milled construction
Differentials: Ball type with lightweight outdrives
Spur Gear: Plastic, 81 tooth, 48 pitch
Wheels: Plastic yellow dish type front, 0.94" (24mm) wide, 2.4" (61mm) diameter, rear 1.5" (38mm) wide, 2.4" (61mm) diameter
Wheel Hexes: Factory Team front and rear 12mm blue aluminum clamping type
Body: ProLine Bulldog
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Toe-In: Fully adjustable, with titanium turnbuckles, toe-in describes the angle of the front tires as viewed from the top
Suspension: Optimized for use with LiPo batteries, mounts for 4°,
3.5°, 3°, and 2.5° rear toe
Turnbuckles: Factory Team blue anodized titanium turnbuckles
Front axles: Steel center drilled
Steering: Factory Team aluminum bellcrank,
Servo saver: Built-in with aluminum servo saver bolt and heavy duty spring
Battery Strap: Carbon fiber with blue aluminum thumb screws

INCLUDES: Associated RC10 B4.1 Factory Team off-road buggy kit, clear Pro-Line Vortex body with wing, decals, wheels, shock oil and instruction manual

REQUIRES: Radio: Two-channel with high-speed servo
Radio Batteries: (8) AA size
Pinion Gear: Number of teeth to be determined by motor
Motor: 540 size for buggy applications
The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable motor and ESC for this vehicle.
Battery: 6-cell NiMH with standard connector OR 2S LiPo battery
Battery Charger: To match selected battery
Building and track equipment

SPECS: Vehicle;
Length: 15.16" (385mm)
Width: varies with type of tires used
Weight: 3.4lbs (1530g) running weight will vary depending on parts
installed
Wheelbase: 11.1" (281mm)
Internal Gear Ratio: 2.6:1
Body:
Length: 11.3" (287mm)
Width: 5.5" (140mm)
Height: 2.9" (73mm)

COMMENTS: For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 3/16x3/8" Transmission 2 DTXC1423
2 10x16mm Transmission 1 ASCC9832
2 3/16x3/8" Rear Hubs 1 DTXC1423
2 .187x0.50x.196 Rear Hubs 1 ASCC7935
4 3/16x3/8" Front Hubs 1 DTXC1423