Sprint Car

CDK RC Bodies Shark Sprint Nose with out the mount.  This will fit the Custom Works RC Wide cages

CDK RC Bodies High Roller Sprint Hood / Nose with out the mount.  This will fit the Custom Works RC Wide cages

These optional polycarbonate pieces attach to the front of the rear arms to help keep dirt from hitting the CVA and rear shock shaft. These were designed for the Outlaw series of cars but will work on just about any CW adjustable arm provided that the...

The Assault RC Flexi Brace body braces will keep your body shape while allowing the panels to flex when you are under pressure.  These braces have a black or slate grey carbon fiber look on one side and black or slate grey look on the other side...

High Down Force Flat Wing: The unique design of the wings molded center section provides a combination of High Downforce and Balance. Team drivers have noticed an increase in overall downforce using this wing along with a more consistent feel when...

Our new 8 sq in front wing center is molded from 0.030” polycarbonate with a rolled leading edge and molded in rear spoiler. Side board are from .020” polycarbonate flat stock with a 0.25“ bend on the top and bottom edge, and the wing...

The CDK front wing mount (CDKM087) has been updated to provide trackside adjustment front to back along with wing angle. Now with the adjustment of 2 screws you can adjust the front pitch/height of your front wing to a 1/2” of adjustment...

Beach RC says...This is a Custom Works SPRINT WING CENTER SECTION ONLY 6×6

Beach RC says...This is a Custom Works Wing & Side Panel Brace. This is a replacement for the Enforcer 7 and Outlaw 3 kits. Package includes one clear wing and side panel brace.  

7" x 7" VORTEX SPRINT CAR TOP WING Comes with Mounts to fit all Sprint Cars kits using the V2 cage (#3430) This includes Outlaw 3 and 4 Enforcer 6 and 7 and most sprint car conversion kits for off-road buggies. 

Custom Works 4.5 x 3" Large Front Wing. This is a replacement for the Outlaw 3 kits. Package includes one clear clear front wing assembly with factory applied overspray film, and assembly hardware.   

1/10 Scale Sprint Tail Tank.

This is an uncut poly-carbonate body kit. Kit comes with side panels, tail tank, and hood for the Hyperdrive GFR1, 2018 GFR1 and Assault 3.0 sprint cars.

The Assault RC Flexi Brace body braces will keep your body shape while allowing the panels to flex when you are under pressure.  These braces have a black carbon fiber look on one side and jet black look on the other side with a 3mm hole on each...

Custom Works Knoxville Sprint Body Motor Decals. This is a replacement for the Enforcer 7 and Outlaw 3 kits. Package includes one decal sheet.