Dualsky XC850TF ESC

Competition 150A Sensored Brushless ESC for 1/10 and 1/12 Scale Vehicles

ICE CORE 2 Technology

A full metal laminated jacket (patented) completely covers all power components. Double power plates reduce the IR of PCB. The PCB is also soldered with a pure copper conductive heat sink. All of these processing steps are the basis for the ICE CORE 2 heat dissipation technology.

150A High Power Output

Using low IR power transistors (MOSFETs) along with ICE CORE 2 technology allows the XC850TF to tolerate higher currents and support 4 pole motors and short course vehicles.

Small Control Module

Since XC850TF has ICE CORE 2 Technology and uses premium quality MOSFETs the control module is placed above the MOSFETs and only handles LED indicator and sensor wire functions. This means the control module size is reduced.

Ultra Small Design

With a smaller control module and the use of a double MOSFET power board the XC850 is much smaller than other brands.

Full Metal Jacket

The full metal jacket along with other design features that keep the ESC cool means that a fan is optional.

Large Capacity High Frequency Capacitor

The use of an external capacitor and the excellent heat dissipation characteristics of the XC850 ensures the control module operates in a very stable manner.

Thermal Protection

Thermal protection that will kick in to prevent damaging the device under overload conditions.Optional Fan Support

There is an external fan power supply interface so you can add a cooling fan

Dualsky Digital Racing Profiles (DDRP)

Dualsky worked with top drivers to develop four standard profiles using nine different parameters for both stock and mod racing. Use one of the included profiles to get up and running quickly and then modify them to suit your own needs.

Intelligent Dual-Mode Drive

The XC850 is compatible with both sensor and sensorless operation and will automatically switch to sensorless mode if a sensor wire or board go bad during the middle of a race.

Autocell Detect Technology

No need to set the battery type and voltage.

Programming

Changing settings is accomplished through either the programming card (ProdCARD plus) or USB Link.