YOKOMO

This is a replacement Yokomo Graphite Rear Shock Tower. This tower is roughly 4mm thick...

This is a replacement Yokomo YZ-2 DTM Rear Universal Axle for the YZ-2 DTM Universals (YOKZ2-01065M). This axle is used with the...

This is a pack of two optional Yokomo Aluminum Front Axles, compatible with all YZ-2 models. These axles are lightweight and...

This is a pack of two replacement Yokomo Rear Axle Bearing Spacers for the YZ-2 DTM. These spacers are used with the YOKZ2-415RDM...

This is a pack of four replacement Yokomo Wheel Hub Pins, and are intended for use with the Yokomo B-MAX4 II 1/10 scale 4wd buggy...

This is a replacement Yokomo Differential Adjustment Screw Kit, and is intended for use with the Yokomo B-MAX2 and B-MAX4 1/10 buggies...

This is a pack of four replacement Yokomo "X" Version II Shock Cap Drain Screws with included o-rings, intended for use with the optional...

This is a replacement Yokomo Ball Differential T-Nut and Spring Set, and is intended for use with the Yokomo B-MAX2 MR and RS 1/10 scale...

This is a replacement Yokomo Outdrive Set. This set includes a left and right side outdrive for the ball differential...

This is a replacement Yokomo Front Suspension Mount Set, and is intended for use with the Yokomo B-MAX2 1/10 scale buggy. Package includes two front...

This is a replacement Yokomo Front Outer Hinge Pin Set, and is intended for use with the Yokomo B-MAX2 1/10 scale buggy...

This is a replacement Yokomo Spacer Shim Set. This set includes three sizes of spacers, ten pieces of each size.  Includes: (10) 5x8x0.05mm...

This is a pack of two optional Yokomo 48mm Titanium Turnbuckles. These 48mm long turnbuckles are used on the YZ-4 for the front camber...

This is a replacement Yokomo 10mm Stainless Steel Spacer Shim Kit, and is intended for use with the Yokomo BD7 1/10 scale touring car. This kit...

This is a replacement Yokomo 12.7mm Socket Head Ball Stud Set, and is intended for use with the Yokomo BD7 1/10 scale touring car. These ball studs are...

This is an optional Yokomo 14.7mm Socket Head Ball Stud Set, and is intended for use with the Yokomo BD7 1/10 scale touring car. These ball studs are used in...

The Yokomo BD8 Aluminum Clamping Servo Horn is an aluminum servo horn that allows more direct operation of the servo. The distance from the servo output...

The Yokomo YZ-4 Rear/Rear Suspension Mount must be used in combination with the L5 Rear Arms (YOKZ4-008RL5) and Rear/Front Mount (YOKZ4-300LRF). The combo...

This is optional Yokomo Titanium Turnbuckle kit is designed for use with the YZ-2 Dirt Edition and includes six turnbuckles made from titanium alloy material...

This is a replacement Yokomo X33 Shock Plastic Parts Set. This package includes parts for four shocks, and includes shock tools...

This is a replacement Yokomo Shock End Plastic Parts Set for the YZ-2 DTM and YZ-4. This set includes two shock ends in Medium and Large lengths, and four Small...

This is a replacement Yokomo X33 Inner Shock Spacer Set. This set includes the parts to service two shocks.

This is a pack of two replacement Yokomo X33 Shock Adjuster Nuts. This package also includes two o-rings. 

This is a pack of eight replacement Yokomo X33 Shock X Rings. This package will service four shocks. 

This is a pack of two optional Yokomo V3 Titanium Coated Front Shock Shafts. These shafts feature a 3.3mm diameter and are compatible on the front shocks of the YZ-2 series of...

This is a pack of two optional Yokomo V3 Titanium Coated Rear Shock Shafts. These shafts feature a 3.3mm diameter and are compatible on the rear shocks of the YZ-2 series of...

This is an optional YokomoYZ-2 CA Rear 30g Balance Weight. This weight is about 30g and is attached to the lower main chassis of the rear transmission case. It promotes lower...

This is an optional Yokomo Ventilated Outer Slipper Plate, to be used as the outer plate for the standard YZ-2 and B-MAX2 series slipper. This ventilated plate is made from...

This is an optional Yokomo Ventilated Dual Slipper Set. This advanced slipper provides YZ-2 and B-MAX2 series owners the option of a dual slipper design to provide smoother...

This is a replacement Yokomo Idler Gear for use with the YZ-2 Carpet Edition transmission. This idler gear uses two 5x10x4mm bearings (YOKBB-105-2).