TRAXXAS

Skid plate, front (1), rear (1)/ rubber impact cushion (1) Front and rear skid plates with rubber impact cushion   Replacement part for these...

Tailgate protector/ 3x8mm flathead screw (4) The X-Maxx tailgate protector provides additional strength for the rear lip of the body for added durability. Includes 3x8 mm screws (4). Replacement...

Chassis Replacement XRT™ chassis   Replacement part for these models:   XRT™            

Tires, Canyon Trail 4.6x1.9" (S1 compound)/ foam inserts (2) Canyon Trail 1.9” x 4.6” tires feature deep tread blocks for maximum traction on rough terrain. Trail-tuned foam inserts...

Skidplate, center/ 4x20 CCS (4)/ 3x10 CS (4) (fits Maxx® with extended chassis (352mm wheelbase)) Center skid plate for V2 (352 mm wheelbase) Maxx® includes 4x20 mm screws (4) and...

Battery hold-down/ battery compartment spacers/ foam pads Pair of XRT™ snap-lock battery hold-downs with spacers and foam pads   Replacement part for these...

Shock tower, front (left & right halves) Left and right front shock tower halves   Replacement part for these...

Dual cooling fan kit, low profile (with shroud) (fits #3491 motor) The dual cooling fan kit adds twin fans and a low-profile shroud to the 3362X low-profile aluminum heat sink...

Portal drive housing, inner, front (left & right)/ 2.5x4 BCS (6) Inner front portal drive housings (L&R) with 2.5x4 mm screws (6) Replacement part for these models: TRX-4® 1979...

Servo mount/ bulkhead cover/ chassis brace/ steering cover/ 3x12mm CS (2)/ 3x8mm CS (2) Replacement XRT™ chassis brace with servo mount, bulkhead cover, steering cover, 3x12 mm...

Camber links, front (TUBES Blue-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrench (1) TUBES 67 mm (center to center) aluminum...

Camber links, front (TUBES Red-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrench (1) TUBES 67 mm (center to center) aluminum front...

Camber links, front (TUBES Pink-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrench (1) TUBES 67 mm (center to center) aluminum...

Camber links, front (TUBES Charcoal Gray-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrench (1) TUBES 67 mm (center to center)...

Camber links, front (TUBES orange-anodized, 7075-T6 aluminum, stronger than titanium) (2) (assembled with rod ends and hollow balls)/ aluminum wrench (1) TUBES 67 mm (center to center) aluminum...

750mAh 7.4V 2-Cell 20C LiPo Battery Traxxas Certified iD®-Equipped LiPo batteries provide the punch and on-demand power to reach the top speeds that Traxxas models are built to deliver...

Suspension link set, 6061-T6 aluminum (Blue-anodized) (includes 5x53mm front lower links (2), 5x46mm front upper links (2), 5x68mm rear lower or upper links (4)) Take your TRX-4M™ to...

Body, Chevrolet K10 Truck (1979) (clear, requires painting)/ decals/ window masks (includes grille, side mirrors, door handles, windshield wipers, clipless mounting, hardware) (requires #9288 inner...

LED light set, complete (includes front and rear bumpers with LED light bar, rear LED harness, & BEC Y-harness) (fits Slash® 4X4) Traxxas LED light kits are built tough, with factory fit and...

Servo mount, 6061-T6 aluminum (Red-anodized) Eliminate flex and increase steering precision in your TRX-4M™ by adding this aluminum servo mount. The mount is made from high-grade...

Servo mount, 6061-T6 aluminum (Gray-anodized) Eliminate flex and increase steering precision in your TRX-4M™ by adding this aluminum servo mount. The mount is made from high-grade...

Servo mount, 6061-T6 aluminum (Orange-anodized) Eliminate flex and increase steering precision in your TRX-4M™ by adding this aluminum servo mount. The mount is made from high-grade...

Driveshafts, center, male (steel) (4)/ driveshafts, center, female, 6061-T6 aluminum (Gray-anodized) (front & rear)/ 1.6x7mm BCS (with threadlock) (4) Upgrade your...

Shocks, GTM, 6061-T6 aluminum (Green-anodized) (fully assembled w/o springs) (4) Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are...

Shocks, GTM, 6061-T6 aluminum (Red-anodized) (fully assembled w/o springs) (4) Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are made...

Shocks, GTM, 6061-T6 aluminum (Gray-anodized) (fully assembled w/o springs) (4) Take your TRX-4M™ to the next level with big-truck suspension technology. Heavy-duty GTM shocks are...

Suspension link set, 6061-T6 aluminum (Red-anodized) (includes 5x53mm front lower links (2), 5x46mm front upper links (2), 5x68mm rear lower or upper links (4)) Take your TRX-4M™ to...

Suspension link set, 6061-T6 aluminum (Gray-anodized) (includes 5x53mm front lower links (2), 5x46mm front upper links (2), 5x68mm rear lower or upper links (4)) Take your TRX-4M™ to...

 Caster blocks (c-hubs), left & right These left and right caster blocks (C-hubs) were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade...

  Steering blocks, left & right These left and right steering blocks were redesigned and beefed-up for XRT™. Standard in XRT, they can be used to upgrade...