TEKNO

Product DescriptionTKR6670 – Spur Gear (70t, 48pitch, composite, black, EB410) The TKR6670 70 tooth black composite spur gear is intended to be used on the EB410 buggy when running a 13.5 (or...

Product DescriptionAfter undergoing several months of race proven testing, we are pleased to release the new EB410 Aluminum Stub Axles. The new axles are CNC machined from 7075 aluminum, hard...

Product DescriptionTKR6712A – Shock Caps (7075, emulsion, black ano, 2pcs) Our optional shock caps are CNC machined from high quality 7075 aluminum and black anodized for a stealth look. Tekno...

This is the Revised Bulkhead Setfor the Tekno RC EB410 Competition Buggy Kit, TKRC6500. FEATURES: Two-piece molded plastic construction strengthened to reduce fatiguefrom extreme impactsReplaces...

This is the Chassis Brace Set for the Tekno NB48 Buggy Kit. FEATURES: Composite plastic construction, black in color INCLUDES: Five Chassis Brace Components

After undergoing several months of race proven testing, we are pleased to release the new EB410 Aluminum Stub Axles. The new axles are CNC machined from 7075 aluminum, hard anodized for wear, and...

This is a pair of Rear Shock Bodiesfor the Tekno RC EB410 Competition Buggy Kit, TKRC6500. FEATURES: Aluminum construction, gun metal gray in color INCLUDES: Two Rear Shock Bodies SPECS: Inner...

This is the Tekno RC Bell Cranks and Top Plates. TKR8104 includes several all new parts to improve steering response and support the TKR8100 Ackermann plate. New bell cranks accommodate the extended...

This is the Tekno RC 23T Aluminum Servo Horn. FEATURES: 23 tooth spline fits Airtronics, JR, and KO servosBottom mount design lowers leverage point to reduce damage to theservo spline in the event...

Tekno RC EB410 Front TiNi Coated Shock Shafts. This is an optional upgrade for the Tekno EB410 4wd buggy. Ti-Nitride shock shafts are smoother, and longer lasting that standard coated shock shafts...

Tekno RC EB410 Rear TiNi Coated Shock Shafts. This is an optional upgrade for the Tekno EB410 4wd buggy. Ti-Nitride shock shafts are smoother, and longer lasting that standard coated shock shafts...

This is an optional Tekno RC EB410 Differential Riser Hinge Pin Brace. This C Block is for use with the Diff riser. 

This is the carbon fiber light weight option front shock tower for the EB410. It shares the exact same geometry as the standard (plastic) shock tower providing lower weight and increased durability...

This is an optional Tekno RC EB410 Carbon Fiber Steering Top Plate.   

This is a replacement Tekno RC 2S Battery Strap Set. These straps are ‘cinch’ straps and wrap around on themselves for superior holding power and durability without relying on grommets or...

TKRBB06103 – Ball Bearings (6x10x3, 4pcs) EB48 and SCT410 bearings for the steering posts. 4pcs required in kit.

This is a replacement Tekno RC Aluminum Servo Saver Post, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy.  

This is an optional Tekno RC 2.4mm Rear Sway Bar. This sway bar is compatible with the ET48 and NT48 1/8 scale trucks, and is two steps softer than the sway bar included in the kit.

TKR5053A – Pivot Balls (6.8mm, flanged, outside camber, aluminum, 4pcs)

This is a replacement Tekno RC ESC Tray O-Ring Set, and is intended for use with the Tekno R/C EB48 electric 1/8 buggy. These are the o-rings that are glued to the underside of the TKR5065 ESC tray...

TKR5230 – Steering Linkage (M3x18mm threaded rod, 10pcs)

TKR1605 – M3x10mm Set Screws (black, 10pcs) These are used to secure the locking spring perch and rod ends (TKR6140) and can also be used anywhere an M3x10mm set screw is required.

This is a pack of four optional Tekno RC Shock Bushings, allowing you to replace the bushings on all four shocks at the same time.  

Tekno RC EB410 CNC Delrin Shock Cartridge Bushing. This is a replacement for the Tekno EB410 4wd buggy. Package includes four shock cartridge bushings.   

TKR5152 – Diff Pinion (straight cut, 10T, CNC) These gears are CNC machined from high quality steel, then hardened for durability.  They will provide smoother and more efficient operation...

Tekno RC EB410 Kingpin Shoulder Screws. This is a replacement for the Tekno EB410 4wd buggy. Package includes four kingpin screws.   

Tekno EB410 Aluminum Servo Horn. This low profile clamping style 25T horn uses M3 clamp screws and is a must have EB410 upgrade.   

Tekno RC EB410 Front/Rear Inner Hinge Pins. This is a replacement for the Tekno EB410 4wd buggy. Package includes two hinge pins.

Tekno RC EB410 Shock/Cartridge Cap & Bushing Set. This is a replacement for the Tekno EB410 4wd buggy. Package includes four upper shock caps, four lower shock caps, four shock cap bushings and...

Tekno RC Battery Strap Thumb Screw. This is a replacement for the Tekno EB410 4wd buggy. Package includes one thumb screw that can be used with both the stock composite and optional carbon battery...