RPM

These are the optional RPM Nerf Bars in Black for the 2WD Traxxas LCG Slash. FEATURES: Engineering grade nylon constructionReplaces the Traxxas #5833, #5833A & #5833G nerf barsDesigned...

These are the optional RPM Heavy Duty Rear A-Arms for the Traxxas Bandit. FEATURES: Composite construction, black in colorHinge pin bosses strengthened by approximately 20% over stock...

Up to this point, e-Rustler, e-Stampede, Slash & Bandit owners have relied on bushings or undersized, weak bearings to handle the punishing chores of supporting the wheels. RPM’s front and...

These are the RPM Blue Front Caster Blocksfor the Electric Powered Traxxas 2WD Slash, Stampede, Rustler,and the Nitro Powered Slash**NOT compatible with nitro versions of the Rustler and...

FeaturesTwo mounting holes on the gear cover and three on the motor sideAdditional mounting screws that help transfer and reduce impact energy into the transmission caseMolded in strong proprietary...

FeaturesNearly 25% lighter than stockStronger material resists flexing and breakingIncreased clearance in outer area of arms OverviewRPM front A-arms for the Traxxas Slash, e-Rustler &...

RPM Caster Blocks for the Traxxas Slash, e-Rustler & e-Stampede are the final link in for a complete, bulletproof front suspension from RPM for these trucks. RPM Caster Blocks are redesigned to...

This is a Wide Front Bumper for the Traxxas Rustler and Stampede. The Bumper goes on the Front of the Vehicle and Protects the Chassis. FEATURES: Durable Plastic ConstructionGreen in...

This is a Wide Front Bumper for the Traxxas Rustler and Stampede. The Bumper goes on the Front of the Vehicle and Protects the Chassis. FEATURES: Durable Plastic ConstructionBlue in...

This is a Wide Front Bumper for the Traxxas Rustler and Stampede. The Bumper goes on the Front of the Vehicle and Protects the Chassis. FEATURES: Durable Plastic ConstructionBlack in...

When it comes to RPM rod ends, we are the basis for comparison! Our rod ends have oversized hexes and our ball cups are molded to the strictest of tolerances & are molded from our blend of tough,...

When it comes to RPM rod ends, we are the basis for comparison! Our rod ends have oversized hexes and our ball cups are molded to the strictest of tolerances & are molded from our blend of tough,...

When it comes to RPM rod ends, we are the basis for comparison! Our rod ends have oversized hexes and our ball cups are molded to the strictest of tolerances & are molded from our blend of tough,...

This is the RPM Low Visibility Wheelie Bar for the Traxxas X-Maxx. **Must be used with the RPM #81762 Rear Bumper Mount****Will not work with stock, or any other known aftermarket rear bumper...

These are Optional Blue Lower Spring Cups that fit most Traxxas & Losi shocksThese cups fit on top of the shock end and hold the spring. FEATURES: Durable nylon constructionRPM Blue that matches...

These are the optional RPM Short Rod Ends for Traxxas 1/10 scale Vehicles. FEATURES: Constructed of plastic composite construction, black in colorReplaces Traxxas part #5347, TRAC5347Used to connect...

These are the optional RPM 1/10 scale Long Rod Ends in White for Traxxas Vehicles. FEATURES: Constructed of plastic, white in color (may be dyed to desired color)Connects linkage rods to...

Losi vehicles need longer shank rod ends to accommodate shorter turnbuckles. With these rod ends, you may replace your stock Losi rod ends with our superior RPM rod ends! They maintain our close...

RPM Traxxas Steering Blocks are the perfect solution for worn bushings and weak 5x8mm bearings. Give your electric the same bearing the nitro trucks come stock with - 5x11mm! The oversize bearings...

This is the RPM True-Track Rear A-Arm Conversion for the Traxxas T-Maxx 2.5R & 3.3/E-Maxx 16.8. ...

This is the optional RPM Front Bumper and Skid Plate for use on the Traxxas Slash 2WD Short Course Racing Truck RTR. ...

This is an optional Front Chrome Nylon Bumper for the Traxxas T/E-Maxx. This part replaces the stock satin chrome front bumper. ...

This is an optional Silver Front Bumper for the Traxxas T/E-Maxx. This part replaces the stock satin chrome front bumper. ...

This is a pair of RPM Black Rear Propeller Guards for the Dromida Vista and Ominus Quadcopters. ...

These are the RPM Propeller Guards in Blue for the LaTrax Alias Heli. FEATURES: Plastic construction, black in...

These are the optional RPM Front Shock Tower for the Traxxas Nitro Rustler & Nitro Sport. ...

These are the optional RPM Front Shock Tower for the Traxxas Nitro Rustler & Nitro Sport. ...

This is the optional RPM Front Skid Plate for use on the Traxxas 2WD Slash. ...

This is the optional RPM Rear Skid Plate for use on the Traxxas 2WD Slash. ...

This is an optional Front Blue Nylon Bumper for the Traxxas T/E-Maxx. This part replaces the stock satin chrome front bumper. ...