PROTEK

The ProTek R/C "Prodigy 610ez AC/DC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger is a single port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 100V/220V voltage...

  ProTek RC 370TBL Black Label High Torque Brushless Crawler Servo The ProTek 370TBL was developed specifically for crawler applications. Heavy 2.2 class rigs, U4 racers, lightweight 1.9 comp...

This is the ProTek R/C "Prodigy 610 QUAD AC" LiHV/LiPo/LiFe/NiMH AC/DC Battery Charger. A quad port AC/DC charger that can handle 6S packs, is capable of 10 amp charge rates, worldwide 110V/220V...

This is the ProTek R/C Universal Radio Case Insert, intended for use with the ProTek R/C Universal Radio Case and Sanwa M17 Transmitter. This high density foam insert will allow you to adapt the...

This is the ProTek R/C Universal Radio Case Insert, intended for use with the ProTek R/C Universal Radio Case and Futaba 7PX. This high density foam insert will allow you to adapt the Universal Radio...

The ProTek R/C 1/8 Buggy Carrying Bag is a clean and convenient way to transport your buggy. Designed for racers looking for a convenient solution to transport a nitro or electric buggy,...

The ProTek R/C 1/10 Buggy Carrying Bag is a clean and convenient way to transport your buggy. Designed for racers looking for a convenient solution to transport an electric 1/10 buggy, the...

The ProTek R/C Starter Box Carrying Bag is safer and more convenient for carrying a roaring nitro vehicle to and from the pits. 1/8 scale tires spinning at several thousand RPMs are...

This is the ProTek R/C High Capacity 1S Transmitter Battery with 5500mAh of capacity, for use with the Sanwa M17 Surface Transmitter. This light weight Li-Poly transmitter battery will help to...

Type a description for this product here...

This is the ProTek R/C Universal Radio Case Insert, intended for use with the ProTek R/C Universal Radio Case and Sanwa/Airtronics MT-44. This high density foam insert will allow you to adapt the...

The ProTek RC Servo Lead & Terminal Crimping Tool is the tool you need to make custom length signal wires for your ESCs, receiver batteries and servos. This tool safely secures the connector pins...

This is a set of ProTek R/C XT30 device and battery connectors. ProTek R/C XT30 Connectors have 2mm pins and are made from high-temp Nylon and gold plated spring connectors inserted in the injection...

This is a Protek R/C Ceramic 14x25.4x6mm "MX-Speed" Rear Engine Bearing, and is intended for use with any nitro engine that requires a 14x25.4x6mm rear bearing. ProTek MX-Speed engine bearings offer...

This is a rubber sealed "Speed" ceramic front engine bearing from ProTek R/C. This bearing is designed to fit the O.S. MAX .21 RG, VZ-B and VZ-B V-Spec off-road competition buggy engines. This...

This is a Protek R/C Ceramic 14x25.4x6mm "MX-Speed" Rear Engine Bearing, and is intended for use with the O.S. VZ-B V-Spec, 30VG, the original Novarossi P5, 421B, Picco P3 .28, and Axe Rossi Cobra...

This is a rubber sealed "Speed" front bearing from ProTek R/C. This bearing is designed to fit the O.S. MAX .21 RG, VZ-B and VZ-B V-Spec off-road competition buggy engines. This bearing will also fit...

This is the ProTek R/C 2090, EFRA 2089 Tuned Pipe, with an included 2090 Manifold. This package also includes two long manifold springs, three short pipe springs and two manifold gasket. The ProTek...

This is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed...

ProTek RC 170TBL Black Label High Torque Brushless Servo. Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that...

This is a set of ProTek R/C "TruCurrent" XT90 device and battery connectors. This set contains four  male connectors. ProTek R/C "TruCurrent" XT90 Connectors have 4.5mm pins and are made from...

This is a set of ProTek R/C "TruCurrent" XT90 device and battery connectors. This set contains four female connectors. ProTek R/C "TruCurrent" XT90 Connectors have 4.5mm pins and are made from...

This is a pack of four pairs of locking Futaba style servo connectors. Included are four female and eight male connector housings (four Futaba and four JR style) and eight sets of connector pins...

This is one receiver charge lead lead from ProTek R/C. This charge lead has a Futaba style battery connector on one end that will accept both Futaba and JR/Airtronics style battery connectors,...

This is a ProTek R/C "TruTorque" Metric Power Tool Tip Set, with 1.5, 2.0, 2.5 and 3.0mm tips. No one wants to spend money on low quality tools. Tools are an investment that should not be taken...

ProTek RC 6" Digital Calipers feature a high-contrast LCD display, stainless steel construction and guaranteed accuracy to 0.001"/0.02mm, making them a must have for any enthusiasts tool box! The...

This is the ProTek R/C "Blue Flame" DC Nitro Engine Heater. The “Blue Flame” Engine Heater utilizes technology similar to that used by Formula 1, Indy Car and NASCAR racing teams to...

This is a ProTek R/C 4mm Aluminum Long Clamp Lock Servo Horn, and is intended for use with any servo that uses a 24 tooth spline output shaft. This extremely tough servo-horn has been machined from a...

This product was added to our catalog on February 17, 2010. This is the ProTek R/C LiFe Car Transmitter Battery Pack, and is intended for use with the Futaba 4PK, 4PV, 4PX and 7PXTransmitters...

This is a ProTek R/C Balance Charge Lead with a 2S Balance Harness to 4mm Banana Plugs with 4S Balance Adapter. This incredibly handy charge lead was developed to provide users with the option of...