LOSI

This is a pack of eight replacement #8 countersunk washers from Losi.

These are replacement Losi 4mm and 5mm Set Screws. Each pack contains six screws of each size. Set screws are used to secure drive yolks to pinion gears and outdrive cups to output shafts.

If you can dish it out, the Losi TENACITY short course truck can take it. This basher is built on the original TEN platform—known worldwide as one of the toughest platforms around. Now Losi is...

If you can dish it out, the Losi TENACITY short course truck can take it. This basher is built on the original TEN platform—known worldwide as one of the toughest platforms around. Now Losi is...

When it comes to buggy racing, the TLR® 8IGHT™ platform reigns supreme. The 8IGHT-E™ lives up to its heritage and will not disappoint, whether you're racing on the track or street...

This is a replacement Losi Mini 8IGHT-T Hardware Set. Package includes all the screws and bolts used on the Mini 8IGHT-T.   

This is a optional Losi Aluminum Crawler Servo arm, with a Futaba servo spline pattern (25T), and is intended for use with the Losi 1/10 Comp Rock Crawler    

Uses one 5x10 and one 5x13mm bearing. These are available as a package under LOS6949 Clutch Bearing Set: 8B,8T or available separately under LOS6954 5x10 Shielded Ball Bearings (2) and LOSA6955 5 x...

Uses one 5x10 and one 5x13mm bearing. These are available as a package under LOS6949 Clutch Bearing Set: 8B,8T or available separately under LOS6954 5x10 Shielded Ball Bearings (2) and LOSA6955 5 x...

This is a set of two replacement 15mm top shock caps for the Losi 8IGHT racing buggy.

Features Plastic spur gears enhance the sound of gear mesh making the car quieterSpur gears are made of highly durable plastic that has been specifically designed for the rigors of 1/8-scale electric...

Features Made from aluminum alloy material Slows wear rate without sacrificing performance Minimal slip rate Lasts up to 3-times longer than other aluminum shoes Overview Guaranteed to pull more...

This is a replacement Losi 5mm and 6mm shim set. These shims are used in the transmission, differentials, and on crankshaft between clutchbell bearing and flywheel nut. These shims can also be used...

Sway Bar Set for the 8IGHT 2.0 Buggy includes one front 2.5mm sway bar, one rear 2.5mm sway bar and one rear 2.0mm sway bar

This is an optional Losi Aluminum Shock Collar Set for use with the Losi 810, TEN-T and TEN-SCTE.

The 8IGHT™ racing platform has multiple ROAR national titles and international wins to its credit. This thoroughly equipped, RTR version gives anyone eager to get into nitro buggy racing...

This thoroughly equipped, RTR nitro truggy is based on the 8IGHT™ buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be...

Losi Front/Rear CV Driveshaft Set. Package includes the parts needed to assemble two complete CVD driveshafts that can be used in either the front or rear position.

Losi switch cover and receiver tray foam pad.

Losi Ten-MT replacement Chassis.

If you crave a realistic, 1/10-scale desert truck experience, complete with the ridiculous power and awesome off-road capabilities the full-scale versions are famous for, this brushless-powered brute...

Features Dynamite® LiPo-compatible brushless ESC4500Kv brushless motorSpektrum™ SRS4210 receiver with Patented* AVC and 2.4GHz DSM® technology7.2V 1100mAh Ni-MH battery pack with...

Type a description for this product here...

TEN-SCBE RTR, AVC: 1/10 4WD SCB (GRN)Heritage and realism collide with the Losi® TEN-SCBE buggy. This fierce buggy pays homage to full-scale demons of the desert with a race-tested suspension,...

Features Dynamite®Fuze™ 130A ESCDynamite® Fuze™3800Kv brushless motorDrivetrain based on TLR® TEN-SCTE 2.0 platformRugged reinforced chassisWaterproof electronics12mm...

This is a pack of twelve replacement 5mm e-clips from Losi.

TEN-SCBE RTR, AVC: 1/10 4WD SCB (ORG)Heritage and realism collide with the Losi® TEN-SCBE buggy. This fierce buggy pays homage to full-scale demons of the desert with a race-tested suspension,...

Mini 8IGHT-T RTR, Maifield Edition:1/14 4WD TruggyEver since its introduction, the Losi® Mini 8IGHT-T™ has resonated with drivers. Now the Mini 8IGHT-T is ready to turn heads again with new...

This is a replacement Losi MS24DS Servo, and is intended for use with the Losi Micro Rock Crawler and Trail Trekker vehicles.

This is a replacement Losi Long-Life NiMH Battery, and is intended for use with the Losi Micro HIGHroller and Micro Trail Trekker vehicles. The high-capacity 4.8V 220mAh NiMH battery provides long...