KYOSHO

IF348-916 Big Shock Spring (L/Red/9-1.6/L=95)Long rear 95mm shock springs, 9 coils of 1.6m wire.

IF348-1216 Big Shock Spring (L/Purple/12-1.6/L=95) Long rear 95mm shock springs, 12 coils of 1.6mm wire.

IF348-1116 Big Shock Spring (L/Light Green/11-1.6/L=95)Long rear 95mm shock springs, 11 coils of 1.6mm wire.

IF348-1016 Big Shock Spring (L/Blue/10-1.6/L=95)Long rear 95mm shock springs, 10 coils of 1.6mm wire.

IFIF347-138 Shock Piston(1.3x8Hole/2Pcs/for Big Shocks)Big shock pistons with 8-1.3mm holes.

IF346-04L Lightweight Shock Bush (For Big Shock/4Pcs)Lightweight aluminum shock mounts for use with the 1/8 Big Bore shocks.Replaces the existing shock mounts with a weight reduction of 5 grams!

IF346-04 Steel Shock Bush (For Big Shock/4Pcs) Steel shock mounts for use with the 1/8th Big Bore shocks.

Replacement diff thrust bearing for the Kyosho Lazer ZX-5 buggies.

Fluorine Shield Bearing (10X15X4/2pcs)

This is a replacement Kyosho 4.8mm Medium Ball Stud Set, and is intended for use with the Kyosho Lazer ZX-5 FS2 SP 1/10 buggy.

97021H Hard Ball End Set (L=10/23/28) Long style hard (gunmetal) tie rod ballend set. Includes 4pcs 10mm, 6pcs 23mm, 6pcs 28mm length tie rod ballends. Genuine Kyosho replacement parts make...

96643 5x7mm Shim Set 5X7mm shims used for spacing 1/10 rear axles. 0.1, 0.2, 0.3mm sizes 10 each.

96641 3x5mm Shim Set 3X5mm shims for spacing suspension arms that use 3mm hinge pins. 0.1, 0.2, 0.3mm sizes 10ea.

Aluminum Tape (40X2500mm) Aluminum reinforced tape can be used to repair/reinforce bodies, or as a heat sheild from the exhaust.

Introducing the Truck version of the RB6. The proven race winning performance of the world champion RB6 is all carried on to this truck chassis! Debut to win! 2013 ROAR National...

KA40004 Kyosho Team Decal Sheet -Black Printed thick vinyl die cut "Team" decals for all Kyosho vehicles. White with a thick black outline.

KA40001 RB6 Chassis Protective Tape Pre-cut protective chassis tape for RB6. 2 sheets are included, 1 white and 1 black. Diecut Kyosho decals and RB6 decals are also included on the sides.

Kyosho Black K Fade design T-shirt with front and back Kyosho logos and prints. (Small)

Kyosho Black K Fade design T-shirt with front and back Kyosho logos and prints. (Medium)

Kyosho Black K Fade design T-shirt with front and back Kyosho logos and prints. (Xtra Large)

LA43 5.8mm Ball End (12pcs) Replacement 5.8mm ball ends, 12pcs included.

IFW53S 3PC Clutch Spring (0.90) Optional soft clutch springs for 3pc clutches.

IFW53 3PC Clutch Spring(1.00) Replacement clutch springs for 2 or 3 shoe clutches.

Kyosho MP9 series IFW149-02 Shock Shaft (L=63mm)

Kyosho IFW140-02 Shock Shaft (L=53mm)53mm replacement shock shaft. Includes washers and nuts. (2pcs)

Kyosho IFB006H High Downforce Body (MP9 TKI3/1.0mm/Hard)

Kyosho Side Guard Set, and is intended for use with the Kyosho Inferno TKI3 1/8 scale buggy. These can also be used with the TKI2 if you want to update your car with the TKI3 radio tray.

This is a replacement Kyosho Chassis Side Guard Set. This set includes the left and right side guard, as well as the small plastic stinger support.    

Kyosho MP9/e wing mount set

IF425-35 Sus. Shaft (3x35mm/2pcs/MP9)Replacement outer front hinge pin for MP9.