Beach RC says... 

150 S BNF Basic

Features

  • SAFE® Technology: Self leveling modes make learning to fly a collective pitch helicopter easier
  • Progressive Flight Modes: Allows you to grow with this heli and build your collective pitch skills
  • Panic Recovery: Recover the heli to a level attitude with the flip of a switch
  • Durable: Carbon fiber and aluminum construction allow the 150 S to be very durable in the event of a crash
  • Collective Pitch: Collective Pitch and SAFE® allows an intermediate pilot to grow with the model when they're ready for aerobatics and 3D flying
  • Metal Gear cyclic servos: Durable, high-speed digital servos
  • Direct Drive Tail Motor: Brushless tail motor delivers impressive heading hold in a simplistic design
  • 5-6 minute flights

Overview

For those looking to hone their skills on a collective pitch machine, the Blade® 150 S kicks the flight experience up a notch. Engineered around the abilities of innovative SAFE® technology, its progressive flight mode system makes flying a collective pitch heli more comfortable, even if it's your first collective pitch helicopter. Self-stabilization, more accurate panic switch, and self-leveling flight modes give intermediate to advanced pilots the confidence to master 3D flight indoors and out. Carbon fiber main frame and main gear along with metal gear servos and Fiber Reinforced Plastic main blades can survive the learning curve and add confidence. The flight and strength improvements make this a blast to fly in your local park or backyard.

Needed to Complete
  • 6+ Channel Spektrum™ DSMX/2 Transmitter
    • Gen2 or iX12 required for Telemetry and Forward Programming features
  • 3S 11.1V 30C+ 400 – 500mAh LiPo Battery
  • Suitable LiPo Charger
What's in the Box?
  • (1) Factory-assembled 150 S Helicopter
    • (1) 155mm Composite Plastic Main Rotor Blades (installed)
    • (1) 65mm Composite Plastic Tail Rotor Blade (installed)
    • (1) Spektrum™ AR6335A Flybarless Controller (installed)
    • (2) Spektrum™ H2070 Metal Gear Micro Heli Servos (installed)
  • (1) Product Manual
 

 

Refined SAFE<sup>®</sup> Technology 
Refined SAFE® Technology

Innovative SAFE® Technology makes the Blade® 150 S the ideal collective pitch trainer. With three progressive flight modes, SAFE® allows for new pilots to learn at their own pace. Beginner mode limits bank angle and self-levels the model as well as dampens altitude adjustments. Intermediate and Advanced modes are perfect for pilots ready to maximize their collective pitch experience.

 

Enhanced Panic Recovery 
Enhanced Panic Recovery

With the Blade® 150 S, Panic recovery is now faster, easier, and more accurate than ever before. With the simple push of a button, the 150 S automatically rights itself, no matter the orientation or flight mode.

 

Optimized Carbon Fiber and Aluminum Design 
Optimized Carbon Fiber and Aluminum Design

The all-new carbon fiber and aluminum design takes frame rigidity to another level for a rock solid flight experience. Plus, the reinforced tail boom mount eliminates the need for cross supports for a more streamlined look while staying extremely durable.

 

Spektrum™ AR6335A Flybarless Controller with AS3X Technology 
Spektrum™ AR6335A Flybarless Controller with AS3X Technology

Cutting-edge Spektrum™ technology is woven throughout the 150 S from the metal geared micro Spektrum™ 2070 servos with Optimized Servo Geometry paired with a expertly tuned AS3X stabilized flybarless controller.

 

 
Spektrum™ Forward Programming Support 
Spektrum™ Forward Programming Support

When controlled by a compatible Spektrum™ Transmitter (Firmware 2.0+ on Gen2 and iX12 transmitters) pilots will have extensive control over the flybarless system and setup right from the transmitter. Including individual cyclic trims, gains, roll rates, and more!

 

Product Specifications

Specs

Approximate Flight Time 5 minutes
Battery Sold Separately
Canopy/Body Material Plastic
Channels 6
Completion Level Bind-N-Fly Basic
Main Blade Material Plastic
Main Frame Material Plastic
Main Rotor Blade Length 6.1" (155mm)
Main Rotor Diameter 14.2" (360mm)
Product Height 5" (128mm)
Product Length 14.4" (365mm)
Product Width 2.4" (62mm)
Receiver Included
Skill Level Level 2
Speed Control Included
Tail Blade Material Plastic
Tail Motor Type Brushless Outrunner
Tail Rotor Diameter 2.5" (64mm)