null
close
close
Sold Out
click to zoom in
  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Mounting, Balancing

  • Wordwide Delivery

    Free shipping on orders $100+

Bambu Lab Silicone Sock for Hotend (H2S)

No reviews yet Write a Review
$2.99
SKU:
BAMFAH022
UPC:
6937285500151
Weight:
0.20 LBS
Shipping:
Calculated at Checkout
Out of stock

Bambu Lab Silicone Sock for Hotend (H2S)

$2.99

Out of stock

Overview

The silicone sock is a black cover that serves the primary function of maintaining nozzle temperature stability and isolating impurities, preventing the filament from soiling the nozzle and affecting print quality.

 

You should replace the silicone hotend cover if any of the following signs occur:

 

1. Cracks or Damage
If the silicone cover shows visible cracks or tears, it should be replaced immediately. Any opening can compromise the insulation performance of the hotend, allowing heat to escape and resulting in unstable printing temperatures.

 

2. Looseness or Detachment
The silicone cover should fit tightly around the hotend. If it becomes loose or easily slips off, it cannot effectively protect the nozzle and heating block. Cold air from the environment may cause temperature fluctuations and could interfere with the printer’s wiping or leveling functions.

 

3. Deformation Due to Prolonged High Temperatures
Extended exposure to high temperatures can cause the silicone cover to stretch or deform, preventing it from fitting tightly or fully covering the hotend. If deformation is observed, replacement is necessary.

 

4. Frequent Filament Build-up on the Heating Block
If you notice frequent residue or filament build-up around the hotend, it may indicate that the silicone cover has failed. A damaged cover cannot effectively block oozing or retracted filament, which can lead to clogging and other issues.

 

5. Discoloration or Brittleness
Prolonged high temperatures can cause the silicone to age, discolor, or become brittle. If any of these signs appear, the cover is nearing failure and should be replaced as soon as possible.

 

6. Friction With Moving Parts (e.g, Nozzle Wiper)
If the cover comes into contact with the other parts of the 3D printer, it may tear or shift out of place. Repeated friction can cause physical wear or misalignment, exposing the nozzle or heating block and affecting heat retention and distribution. It is recommended to inspect the silicone cover after cleaning.

NO TOOLS? NO TIME? NO PROBLEM.

YOU BUY, WE ASSEMBLE!

Wallie builds is the top option for any racer looking to have the best available car at the track. These kits are built to be winners and give you the best opportunity for wins and podiums.

- Wallie Builds will cover shipping charges to anyone in the US.

- Once the sale leaves beachRC and arrives at Wallie Builds we will take full responsibility for the order.

- Anything with the build will be handled by Wallie Builds.

Free Shipping On $100 Orders
Rewards Program
Secure Shopping

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.