Always the correct part
Fitted with a super-reliable EC5 connector and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX100 ESC has over voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 12AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Battery usage - 2S LiPo (7.4V) or 3S LiPo (11.1) / 4-9 Cell NiMH
Low Voltage Cut-Off (LVC) 3.4V per cell
Thermal Protection Temperature 125°C / 257°F
Over-Voltage Protection Over 12.6V
BEC Voltage 6V
BEC Current 4A
ESC Length 43mm / 1.69"
ESC Height 34mm / 1.34"
ESC Width 54.5mm / 2.15" (Including hold-down tabs)
ESC Weight 120g / 4.2oz
Receiver Wire Length 170mm / 6.70"
Battery Wire Length 125mm / 4.92"
Motor Wire Length (Including Connector) 200mm / 7.87"
Switch Length 110mm / 4.33"
Switch Width 12.8mm / 0.5"
Switch Height 18mm / 0.71"
Motor Bullet Connector Size 4mm / 0.16"
Wire Specifications 12AWG
ESC Battery Connector Type EC5
Includes 1 x BLX100 Brushless 3S ESC
Wallie builds is the top option for any racer looking to have the best available car at the track. These kits are built to be winners and give you the best opportunity for wins and podiums.
- Wallie Builds will cover shipping charges to anyone in the US.
- Once the sale leaves beachRC and arrives at Wallie Builds we will take full responsibility for the order.
- Anything with the build will be handled by Wallie Builds.