The SWORKz S35-T2e EVO 1/8 Electric Truggy is designed for pure racing. The geometry of the car provides great corner speed with exceptional traction and easy driving control.

The S35-T2e EVO center chassis lay out is the brand new design same as S35-4e EVO. Its provides 2 ways battery set up. Standard 2S peck batteries (or 2S shorty) can be used in saddle position for lower center of gravity. And one unit 4S standard peck (or shorty) also can be fit in side position.

It’s made from T7075 hard anodized and lightened aluminum was tested by our factory pilots to guarantee best performance.

The standard HET differentials are included and provide High Density Motor Pinion Gear system for options.

The new S35-T2e EVO comes a brand new steering Lay-Down Type Steering Bellcrank servo savor system. With this new Ackerman design gives the driver the feeling of total control over the S35-T2e EVO.

In the kit we include a special BBS piston and oil seal parts that the worlds team drivers tested during the race. They are made by a high Precision Plastic mold machine.

The S35-T2e EVO comes with a longer shock layout in the front and rear.

The construction of the shocks is adapted to that new optimized layout. The smart holder for shock spring plates makes it almost impossible to lose them anymore.

With the new toe-in plates, which now contain square inserts, you can adjust the geometry of your SWORKz S35-T2e EVO to fit every track layout and track condition. The lower arms are made of a newly developed composite material and fit perfectly to the new chassis. Side guards were redesigned as well.

With the new lightened wing support you can adjust various positions and the angle of the wing to give your SWORKz S35-T2e EVO the best stability on the track. Together with the “Speed Rhinoceros III” body shell, perfect aerodynamics is achieved.

Another new development in our SWORKz S35-T2e EVO is the totally new rear hub. Made from composite materials combined with 2 carbon plates gives you the possibility for various setups.

The new designed Motor mount makes it possible to change the motor or adjust the play of the gears very easily.

There are many changes and smart ideas put into your new SWORKz S35-T2e EVO that makes the car a real winner.

The secret of a modern racing car is the possibility to adapt the setup to every track for top pilots but also have a standard setup that works on most tracks for hobby pilots.

The SWORKz S35-T2e EVO represents these two characteristics in perfection. 

The SWORKz development team focused on using materials corresponding to the highest quality standards when designing the car. You will find only 100% SWORKz quality in the S35-T2e EVO kit.

S35-T2e EVO Kit Features  

• T7075 Hard Anodized Lightend Aluminum Chassis (New)
• Brand New Center Chassis Lay Out Design (New)
• 2 Ways System Shock Caps
• Higher and Fixed Shock Spring Holder (New)
• S35 Series BBS System Hex-Cell Shock (New)      
• 3mm Updated Rear Shock Studs
• Pro Ackerman Steering Plate (New)
• Lay-Down Type Steering System (New)
• Servo Saver Aluminum Part (New)
• Servo Saver Fixable Nut
• Servo Saver Post Locking Design (New)
• Pro-composite Carbon Steering Servo Mount Plate (New)
• Steering Balls (New)
• Pro-composite Carbon Steering Knuckle Plates (New)
• Updated Toe-In Plates with Square Inserts (New)
• Lightweight Wing Mount
• Composite Rear Hubs with Carbon Plates
• Multi Adjustable Ball System for Rear Upper Arms
• Anticlock Screws for Shocks
• Easy Change Motor Mounting Plate
• 3 HET Differentials Included
• Front and Rear Universal Cross Drive Shafts
• 2 Front Chassis Braces Included
• Black Competition Shock Springs Included
• Adjustable Wing Position
• Adjustable Wing Angle

Specifications

• Length: 560mm
• Width: 410mm
• Height: 230mm
• Ground Clearance: 80mm
• Wheelbase: 375-380mm
• Track: F: 366mm / R: 368mm
• Gear Ratio: C: 48/15T, F/R 46/10T
• Weight: 4280g (Race condition)