January 18, 2020. SWORKz wins his first world title. And not one title, no, two GT World Championship titles. Both with the SWORKz S35-GT and the SWORKz S35-GTE.

Based on the world champion platform SWORKz S35-GT, SWORKz has further developed. The result is the S35-GT2 and the S35-GT2e, which are improved in many ways.

The S35-GT2e is designed as a thoroughbred racing machine for Electric GT Onroad Racing. It has a brand new design of the unique front and rear suspension. The Ackerman steering geometry was adopted from the 1/8 S35-4E buggy.

The S35-GT2e has a weight-optimized, hard anodized base plate made of high-strength T7075 aluminum. The HET differentials developed by SWORKz are also included in the kit and offer traction that is not possible with other systems.

The new S35-GT2e has an option flat front and rear shock absorber arrangement. The shock absorbers have been optimized for this new arrangement.
The steering geometry of the S35-GT2e gives the driver total control over the S35-GTE.

The wishbone brackets, included with square inserts, allow the axle geometry of your SWORKz S35-GT2e to be adapted to any track layout. The front and rear wishbones are made of a newly developed composite material. The side pans have also been redesigned.

Another new development in the SWORKz S35-GT2e is the completely new rear steering knuckle. Composite material combined with carbon plates offers you the possibility for different setups.
The newly developed composite material works perfectly with the HET differentials for maximum traction.

There are many other changes and ideas in the SWORKz S35-GT2e that make the car a real winner.

The philosophy of SWORKz vehicles is that top pilots can adapt their setup to each route, but hobby pilots can also find a standard setup that makes them faster on a wide variety of routes.
And the SWORKz S35-GT2e has these two properties to perfection.

When designing the vehicle, the SWORKz development team focused on using materials that meet the highest quality standards. The S35-GT2e kit only contains 100% SWORKz quality.
Congratulations on purchasing the new SWORKz S35-GT2e Pro kit. Thank you for your trust in SWORKz.

Please read these assembly instructions carefully before you start building and operating your SWORKz S35-GT2e. These assembly instructions contain step-by-step instructions with which you can finish, prepare and optimize your buggy for racing. Updates, setups and new products are published on all digital SWORKz media.

As always, if you have any questions about your SWORKz products or need help, please contact our official SWORKz dealers and distributors.

FEATURES

• New weight-optimized, hard anodized T7075 base plate
• New front & rear shock mount
• New shock absorber caps
• New 3mm optimized rear shock mount
• New Ackerman steering plate
• New steering system
• New servo saver aluminum part
• New lockable servo saver nut
• New servo saver locking design
• New steering balls
• New steering knuckle plates
• New updated wishbone bracket with square inserts
• New Easy Change Motor Mounting Plate
• New side pans
• New lower wishbones front & rear
• New upper wishbone front
• New composite steering knuckle at the rear with carbon plates
• New multi-adjustable linkage system for the rear upper wishbones
• New anti-lock screws for shock absorbers
• HET differentials front & rear included
• 2 front chassis struts included
• More balance weight positions
• Optimized composite aluminum parts in T7075

Technical Data:

• Length： 490mm
• Width： 308mm
• Height： 145mm
• Ground Clearance： 15mm
• Wheelbase： 325-330mm
• Track： F:304mm / R:308mm
• Gear Ratio: C:46/18T, F/R:43/13T
• Weight：3650g (With battery/Body shell)

S35-GT2e_manual