RC-PROJECT

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

The Weight made in Brass is perfectly integrated into the overall dimensions without touching any component and leaving the necessary space for any bending of the chassis.Thanks to the 2 M3 threaded...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 6 different colors. The muffler support will allow...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The caps are made in Italy with latest generation Swiss type lathe center. Our products are made of Ergal 7075-T6 bar. The caps inserted in the silicone tube eliminate the problem of fuel...

The Fuel Line Extension are made in Italy with latest generation Swiss type lathe center. Our products are made of Ergal 7075-T6 bar. Extensions can be used or to Extend the Fuel Tube or the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

- Custom Glue Formula Specifically Designed for Maximum Bond with Tires- Super-Fast and Crystal Clear Drying- Maximum Strength Bond - Cyanoacrylate. Danger. Bonds skin and eyes in seconds.- Use with...

The new "Limited Version" Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will...

The Steering Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness...

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The New Standoff +5 are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The Steering Post are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The new Shock Caps are made in Italy in Ergal 7075 T6 and then hard anodized and branded with the RC-Project Logo on the front. The 6 upper lightenings have a dual purpose, they allow to reduce the...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...