RC-PROJECT

The new "Limited Edition", crafted like the previous model from Grade 5 Titanium (6Al4V), stands out with a completely redesigned look and an even lighter structure. Enhancing its new aesthetic is an...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 7 different colors. The muffler support will allow...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

After 8 months of intensive testing, we are finally ready to reveal our revolutionary MR105-ZZS bearings, specifically designed and developed for the Clutch Bell.This is not just a commercial...

Complete Kit 3-Shoe Clutch with 1.00 springs. Ready to assemble and install on your nitro engine.

The RC-Project Clutch Bell Shim Kit is a set of shims designed to ensure the proper adjustment of the clutch bell. Here are the key features: - Outer diameter: 7 mm - Inner diameter: 5 mm The kit...

The emulsion screw seal has a rectangular cross-section with a small pocket aimed to facilitate and speed up operations, this will also ensure that the seal is not damaged during the disassembly...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly,...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly,...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where...

Bumpy Bladders: this new option was not present in the previous V1 and was a big surprise for our test drivers. It is an in-between emulsion and honeycomb: not suited for all conditions but where...

Honeycomb Bladders: the bladders have been completely redesigned to work inside the new Shock Caps. Volumes, sections and hardness have been re-designed to have almost zero-rebound during assembly,...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

RC-Project has designed a set of ultra-lightweight, fine thread (M12x1) wheel nuts that combine performance, safety, light weight and style.These wheel nuts are flanged, knurled and feature a closed...

Complete Kit 3-Shoe Clutch with 0.95 springs. Ready to assemble and install on your nitro engine.

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 6 different colors. The muffler support will allow...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...

The new "The Ring" muffler support is made in Ergal 7075 T6 in Italy, it can be mounted on all 1/10 and 1/8 Nitro models and will be available in 6 different colors. The muffler support will allow...

The new "Limited Version" Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will...

The new Shock Caps are made in Italy in Ergal 7075 T6 and then hard anodized and branded with the RC-Project Logo on the front. The 6 upper lightenings have a dual purpose, they allow to reduce the...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

The new Allen Screw is made of Titanium Grade 5 6Al4V certified U.S. derivation, the choice to use Titanium is due to the different thermal expansion compared to Steel; this will make it possible to...

Produced in Ergal 7075 T6 with a thickness of 3mm and then anodized in different colors and marked with the RC-Project Logo.It is very light and resistant and will help to support the wing in case of...