RC-PROJECT

The rubber bands is produced in a high-elasticity rubber capable of work from 1/10 Buggy to 1/8 Truggy.Eight pull tabs are designed to ergonomically conform to your fingers so the user can adjust the...

- Custom Glue Formula Specifically Designed for Maximum Bond with Tires- Super-Fast and Crystal Clear Drying- Maximum Strength Bond - Cyanoacrylate. Danger. Bonds skin and eyes in seconds.- Use with...

The New Standoff are made of Spring Steel and subsequently treated to have a very low wear, thanks to the new design you can vary the length from 0 to + 3mm simply by moving the thickness. The...

The Steering Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness...

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The New Standoff +5 are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The Steering Post are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The new Shock Caps are made in Italy in Ergal 7075 T6 and then hard anodized and branded with the RC-Project Logo on the front. The 6 upper lightenings have a dual purpose, they allow to reduce the...

The whole project has been revised compared to V1, now the Shock Cap can work as Bladder or Emulsion.The NEW V2 Shock Cap now has 4 bleed holes (there were 3 on V1) and a new inclined hole to sceure...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

The Balls are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...

Spring Kit Ø.9 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

Spring Kit Ø1.1 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

Spring Kit Ø1.0 RC-Project can also be mounted to replace the springs of the following products: - HB Racing - Sworkz - Alpha - Mayako

The Weight made in Brass is perfectly integrated into the overall dimensions without touching any component and leaving the necessary space for any bending of the chassis.Thanks to the M3 threaded...

The New Standoff are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The New Standoff +5 are produced from a bar in Ergal 7075 T6 Certificate, unlike all the Standoff currently on the market we have studied a particular Geometry that allows to increase the Contact...

The new front weight system for the hubs will give the possibility to use 2 different configurations 5 or 10 grams (included in the kit).After many tests on the track, we have found a position that...

The new ventilated super-lightweight Brake Disc is build in Steel, Cnc Machining, Heat-Treated, Sandblasting and Precision-Grinding with a roughness that reduces the effect of the vitrification of...

The new ventilated super-lightweight Brake Disc is build in Steel, Cnc Machining, Heat-Treated, Sandblasting and Precision-Grinding with a roughness that reduces the effect of the vitrification of...

The Threaded Shock Pins are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness...

Arm Mount A it is produced in Ergal 7075 T6 and subsequently hard anodized and laser marked.All lightening pockets have a radius of 0.5 on the bottom to increase rigidity and eliminate the risk of...

The New Ackerman Kit for Mugen Seiki MBX8 is designed to gives more consistent cornering and improves cornering speed with an exceptional entry and mid-corner bump handling thanks to esternal wheel...

 The new ventilated super-lightweight Brake Disc is build in Steel, Cnc Machining, Heat-Treated, Sandblasting and Precision-Grinding with a roughness that reduces the effect of the vitrification...

The new front shock tower for HB Racing 819 Rs/817 is made of Ergal 7075 T6 with a thickness of 5mm and subsequently hard anodized and laser marked.The new design made it possible to have the...

The Shock Pins are Made in Italy, with latest generation Swiss type lathe center. Our products are made with Ergal 7075-T6 billet and then Hard Coating with a thickness of 50µ...